Manual Bauknecht BCIF 5O539 PLET (page 8 of 13) (English)

806768

Zoom out

Zoom in

1/13

OPTIONS AND SETTINGS

TABLET (All-in-one)

This setting allows you to optimise the performance of the cycle

according to the type of detergent used. Enable it if you use combined

detergents in tablet form (rinse aid, salt and detergent in 1 dose).

To set the Tablet, enter in the setting

menu by pressing „OK” button and

navigate with „< , >” until „TABLET”

is shown, then press „OK” button.

START DELAY

The start of the cycle may be delayed for a selected period of time.

To set a delay, enter in the setting menu by pressing „OK” button and na-

vigate with „< , >” until „START DELAY” is shown, then press „OK” button.

With each press of the button “>” or “<“, the delay start increases by:

• every 0:30 if selection below 4 hours,

• every 1:00 if selection is below 12 hours,

• every 2 hours if selection is above 12 hours.

Default value is OFF.

If delay is selected, the is lit.

Once „OK” button is pressed the

delay is conrmed and the machine

comes back to the cycle selection

screen with delay value visible.

Press „START” button and close the door within 4 sec. to start the delay.

To remove the delay, press „<” or „>” button until „OFF” is displayed.

MULTIZONE

If there are not many dishes to be washed it can be loaded in one rack

only. Using this option you can select which rack you want to wash.

To set the Multizone, enter in the setting menu by pressing „OK”

button and navigate with „< , >” until „MULTIZONE” is shown, then

press „OK” button.

By default the MULTIZONE is not

active and all racks icons are lit.

The multizone icon becomes lit.

POWER CLEAN

Thanks to additional water jets this option provides a more intensive

and powerful wash in the specic area of lower rack.

Default value is OFF.

To set the Power Clean, enter in

the setting menu by pressing „OK

button and navigate with „< , >”

until „POWER CLEAN” is shown,

then press „OK” button.

TURBO

This option can be used to reduce the duration of the main cycles

while maintaining washing and drying performance levels.

To set the Turbo, enter in the setting

menu by pressing „OK” button and

navigate with „< , >” until „TURBO”

is shown, then press „OK” button.

With each press of the button

„>” or „<“ option will be ON or OFF.

Conrm by pressing „OK” button.

FLOOR LIGHT

A LED light projected on the oor indicates that the dishwasher is

working. The light stays on during the cycle and switches o at the

end of the cycle.

This feature is active by default, but it is possible to deactivate it in the

“SETTINGS MENU”.

TUB LIGHT

When the feature is active the LEDs in the tub are automatically

switched on/o as soon as the user open/close the door respectively.

If the door remains opened for more than 10 min, the LEDs in the

tub switch o (to turn them on again, the door has to be closed and

opened again).

This feature is active by default, but it is possible to deactivate it in the

“SETTINGS MENU”.

This product contains a light source of energy eciency class C.

TABLET OFF

TABLET ON

START DELAY OFF

<STARTS IN h> OFF

<STARTS IN h> 4:00

MULTIZONE OK

POWER CLEAN OFF

POWER CLEAN ON

TURBO OFF

TURBO ON

With each cycle additional options can be used. A full list of available options working with specic cycles can be found in the Cycles Table on

the previous page. All active options are shown on the display.

To set an option press „OK” button. SET OPTIONS message is shown for a few seconds. Then use „<” or „>” button to navigate through the

option list. Press „OK” to select the option, in the setting menu the LED above „OK” button is lit.

If the option is not available, it will be still visible in its position but with „ ”

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bauknecht BCIF 5O539 PLET in the language / languages: English as an attachment in your email.

The manual is 7.57 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bauknecht BCIF 5O539 PLET

Bauknecht BCIF 5O539 PLET User Manual - German - 13 pages

Bauknecht BCIF 5O539 PLET User Manual - Dutch - 14 pages

Bauknecht BCIF 5O539 PLET User Manual - French - 13 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bauknecht BCIF 5O539 PLET Manual

Product: