623733
8
Zoom out
Zoom in
Previous page
1/104
Next page
8
OWNER'S MANUAL
BATAVUS
CONSOLE
BUTTON FUNCTIONS
PLUS/MINUS
(up/down) Adjusts values, sets the resistance
(Level)
MODE
Confirms input or selection of the user
START/STOP
Starts or stops training. Start or Stop is shown
on Display 1 for two seconds before the program
enters the Sleep mode
SAVE
Stores personal data and entered values
RECALL
Displays stored data in the Stop mode and selects
the memory location
RESET
Erases the set values, changes the display
TOTAL RESET
Switches to the start of input
ZOOM1
Switches the display (pressed briefly). If the
button is pressed and held for two seconds during
training, automatic switching is activated. Pressing
the button again deactivates the automatic action.
ZOOM2
Switches the display (as for Zoom1)
RECOVERY
Activates the recovery function (Fitness test). Once
measurement is complete, press the button to exit
this function.
MODE + MINUS
Switches on the blue background lighting.
CONTROL PANEL FUNCTIONS
1. Speed
The speed is displayed in kilometers per hour (km/
h from 0.0 to 99.9).
2. Rotational speed
The drive wheel rotations per minute are displayed.
3. Time
Without a preset time, the control panel starts
counting up from 00:00. The seconds are also
displayed in a strip profile.
4. Distance
Without an input, counting starts from 0.00 and
goes up to 99.00 km (kilometers). For counting
down, the value can be preset starting at 09.00 km
in increments of 1 kilometer.
5. Calories
Calories are displayed in increments of one calorie
upward to 9999 calories.
For counting down, the input uses increments of
10 calories.
6. Pulse
A) Your actual pulse is displayed when using the
hand pulse sensors, the ear clip or the chest strap
during training.
B) In the H.R.C. program (Heart rate control),
you may select the percent ranges of 55%, 75% or
90% appropriate for your age, or you may select
a specific pulse rate (H.R.C./TAG). Resistance is
regulated automatically during training.
7. Your actual fitness index is calculated by the
control panel using your pulse rates.
Please proceed as follows:
A.) After finishing your training session, wait until
the time display in the control panel is no longer
running. Keep the ear clip or the chest strap
attached so that the pulse rates can continue to be
calculated. However, you may also use the hand
pulse sensors. Stop exercising now; otherwise, the
fitness index calculation cannot be performed.
B.) Press the Recovery button. RCV appears on
the display. This means that the control panel is
calculating your fitness index.
C.) Wait quietly until a value of F1 to F6 is
displayed.
This value is your current fitness index. Now press
the Recovery button, and the control panel will
switch to normal mode.
8. Watt
The actual power in watts is displayed during
training. The preset value is 120 watts. It is
possible to adjust watt values starting at 10 watts
upward in increments of five watts.
9. Temperature display
The room temperature is displayed in the Sleep
mode (no training).
10. Calendar
The month, day, and year are displayed in the
Sleep mode.
11. Time of day
The time is displayed using 24-hour mode.
12. Control panel background lighting (backlight)
You may set the brightness and contrast. Press the
Mode and Minus buttons simultaneously to enter
input mode. Press the Plus/Minus buttons to set
the contrast (1 -- 5). Then, press the Mode button
batavusX4.indd 8batavusX4.indd 8 12.10.2005 12:49:3912.10.2005 12:49:39
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Batavus X4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Batavus X4 in the language / languages: English, German, Dutch, French, Italian, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 1,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info