Manual Batavus X4 (page 7 of 104) (English, German, Dutch, French, Italian, Swedish, Spanish, Finnish)

623733

Zoom out

Zoom in

1/104

OWNER'S MANUAL

•

BATAVUS

The chest strap and receiver/adapter are available as

optional extras.

Do not use more than one measuring system at the

same time.

MEASURING PULSE WITH HAND SENSORS

BATAVUS measures pulse with sensors which are

located in the hand supports and which measure

the pulse each time the user touches both sensors

simultaneously.

For reliable pulse measurement, the skin must be

in continuous contact with the sensors and the

skin in contact with the sensors should be slightly

moist. Too dry or too moist skin will impair hand

pulse measurement. Please note also that active

use of the upper body muscles during exercise may

interfere with hand pulse measurement: active

muscles transmit similar electronic signals as the

heart muscle. Therefore, we recommend that arms

be kept relaxed during pulse measurement.

EAR PULSE MEASUREMENT

1. Fit the ear sensor wire plug into the connecting

point of the meter.

2. Attach the ear sensor to the earlobe.

If the sensor does not immediately start measuring

your pulse or if the earlobe is cold, rub the

earlobe with the fingers to speed up circulation.

Physiological differences between different people

may also cause disturbances in pulse measurement.

In these cases, try measuring on the inside

surface of the ear or on the tip of your finger. If

measuring disturbances appear while training,

test the functioning of the sensor while stationary.

Strong, unintentional swaying while training

may also disturb measurement. If pulse values

rise above 150 beats/min., earlobe measurement

may be affected by the speeding up of circulation.

Sometimes a strong light source, e.g. a fluorescent

tube, in the immediate vicinity of the user may

cause disturbances in pulse measurement. In this

case, test the functioning of the sensor by turning

the ear sensor the other way round on the earlobe.

Pulse reading can also be affected, if the battery

power of the meter is too low. Clean the ear sensor

after use with a damp cloth.

TELEMETRIC HEART RATE MEASUREMENT

This equipment has a built in pulse receiver, which

is compatible with a telemetric Batavus Pro Check

pulse transmitter.

NOTE! If you are fitted with a pacemaker, please

consult a physician before using a wireless heart

rate monitor.

If you want to measure your heart rate this way

during your workout, moisten the grooved

electrodes on the transmitter belt with water.

Fasten the transmitter just below the chest with the

elastic belt, firmly enough so that the electrodes

remain in contact with the skin while training, but

not so tight that normal breathing is prevented.

If you wear the transmitter and belt over a light

shirt, moisten the shirt slightly at the points where

the electrodes touch the shirt. The transmitter

automatically transmits the heart-rate reading to

the meter up to a distance of about 1 meter. The

heart-rate value is displayed in the meter. Follow

your heart rate during the training.

REMARKS ON TELEMETRIC MEASUREMENT

If the electrode surfaces are not moist, the heart

rate reading will not appear on the display. If the

electrodes are dry, they must be moistened again.

Allow the electrodes to warm up properly to

ensure accurate heart-rate measurement. If there

are several telemetric heart rate measurement

equipments next to each other, the distance

between them should be at least 1,5 m. Similarly,

if there is only one receiver and several transmitters

in use, only one person with a transmitter should

be within transmission range. The transmitter is

switched to an active state only when it is being

used for measurement. Sweat and other moisture

can, however, keep the transmitter in an active state

and waste battery energy. Therefore it is important

to dry the electrodes carefully after use. When

selecting training attire, please note that some

fibers used in clothes (e.g. polyester, polyamide)

create static electricity, which may prevent reliable

heart rate measurement.

Please note that a mobile phone, television and

other electrical appliances form an electro-magnetic

field around them, which will cause problems in

heart rate measurement.

batavusX4.indd 7batavusX4.indd 7 12.10.2005 12:49:3912.10.2005 12:49:39

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Batavus X4 in the language / languages: English, German, Dutch, French, Italian, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 1,17 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Batavus X4 Manual

Product: