623739
14
Zoom out
Zoom in
Previous page
1/40
Next page
14
OWNER'S MANUAL • T3
rate will show in the “PULSE / INCLINE” Display.
You can also use chest belt to measure your heart rate.
TELEMETRIC HEART RATE MEASUREMENT
This equipment has a built in pulse receiver, which is
compatible with a telemetric Batavus Pro Check pulse
transmitter.
NOTE! If you are fitted with a pacemaker, please
consult a physician before using a wireless heart rate
monitor.
If you want to measure your heart rate this way during
your workout, moisten the grooved electrodes on the
transmitter belt with water. Fasten the transmitter just
below the chest with the elastic belt, firmly enough
so that the electrodes remain in contact with the skin
while training, but not so tight that normal breathing
is prevented. If you wear the transmitter and belt over
a light shirt, moisten the shirt slightly at the points
where the electrodes touch the shirt. The transmitter
automatically transmits the heart-rate reading to the
meter up to a distance of about 1 meter. The heart-rate
value is displayed in the meter. Follow your heart rate
during the training.
REMARKS ON TELEMETRIC MEASUREMENT
If the electrode surfaces are not moist, the heart
rate reading will not appear on the display. If the
electrodes are dry, they must be moistened again.
Allow the electrodes to warm up properly to ensure
accurate heart-rate measurement. If there are several
telemetric heart rate measurement equipments next
to each other, the distance between them should be
at least 1,5 m. Similarly, if there is only one receiver
and several transmitters in use, only one person with a
transmitter should be within transmission range. The
transmitter is switched to an active state only when
it is being used for measurement. Sweat and other
moisture can, however, keep the transmitter in an
active state and waste battery energy. Therefore it is
important to dry the electrodes carefully after use.
When selecting training attire, please note that some
fibers used in clothes (e.g. polyester, polyamide)
create static electricity, which may prevent reliable
heart rate measurement. Please note that a mobile
phone, television and other electrical appliances form
an electro-magnetic field around them, which will
cause problems in heart rate measurement.
OPERATION AND PROGRAMS
1. Insert the Safety key.
2. Press the POWER button. The monitor will turn on.
3. Select program with the SELECT button.
4. In the program PRO1 (Manual program), the
program window will display a track view. In the
program PRO2-7-8 (preset profile program), the
program window will display a profile view. In the
program HRC, the program window will display a
heart symbol. Press ENTER / RESET to confirm your
desired program.
5. In the programs PRO1 and PRO2-7-8, press + / -
buttons to set up your desired time to do the exercise.
Press ENTER / RESET to confirm your setting value.
Press START to begin. In the PRO1 program, set the
incline and speed manually. In PRO2-7-8, the incline
and speed changes are automatic. You can set the
speed and incline of each profile bar also manually
during training.
6. In the program HRC, the program window will first
display AGE. Press + / - buttons input your age and
ENTER / RESET to confirm. The program window
will display HP, press +/- button to input desired
target heart rate. Press START to begin exercise.
The heart rate control is based on changing treadmill
inclination. In this mode you have to adjust the speed
by yourself using the SPEED + / - buttons.
SERVICE MENU
1. During the power ON position (initial mode), first
hold the SELECT button then press the ENTER /
RESET button together to enter the Service Menu.
2. Incline window shows model number, distance
window the software version, kcal window the year,
time window the date, speed window the diameter of
roller.
3. Press ENTER / RESET - the window shows LDU
version and ISP version
4. Press ENTER / RESET to enter KM/MILE switch
mode, Press SPEED + - or INCLINE + - to select KM
or MILE.
5. Press ENTER / RESET – the window shows total
distance.
6. Press ENTER / RESET – the window shows total
hour.
7. Press ENTER / RESET – the console goes back to
initial mode.
MAINTENANCE
The equipment is safe to use only when periodically
maintained and inspected for faults and wear.
CAUTION! Do not attempt any servicing or adjustment
other than those described in this manual. Any other
servicing must be performed by an authorized service
representative. Check the tightness of all fixing
screws once a year. Do not overtighten.
CLEANING AND LUBRICATING THE TREADMILL
FAILURE TO LUBRICATE YOUR TREADMILL MAY
INVALIDATE THE PRODUCT’S WARRANTY!
Wipe the treadmill surfaces, especially the handlebars
and console from dust with a damp cloth or towel.
Do not use solvents. Use a small vacuum nozzle to
carefully vacuum around all visible components (belt,
running deck, side rails etc.). Also keep the area near
the treadmill clean. While in use, the treadmill gathers
dust that may cause problems in the operation of the
equipment.
In average domestic use (a maximum of 60 minutes a
day), you should check the lubrication once a month
BatavusT3_3.indd 14 31.7.2008 14:48:12
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Batavus T3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Batavus T3 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info