Manual Batavus Milano E-go (page 25 of 83) (English, German, Dutch, Danish, French)

779537

Zoom out

Zoom in

1/83

English–1

0 276 001 SAI | (14.8.13) Bosch eBike Systems

Drive Unit Cruise/

HMI Intuvia

Safety Notes

Read all safety warnings and all instruc-

tions. Failure to follow the warnings and in-

structions may result in electric shock, fire

and/or serious injury.

Save all safety warnings and instructions for future

reference.

The term “battery pack” used in these operating instructions

refers both to standard battery packs (battery packs with

holder on the bike frame) and to rack-type battery packs

(battery packs with holder in the rear rack/carrier).

fDo not open the drive unit yourself. The drive unit is

maintenance-free and must be repaired only by quali-

fied experts and only with original spare parts. This will

ensure that the safety of the drive unit is maintained. Unau-

thorised opening of the drive unit will void warranty claims.

fAll components mounted to the drive unit and all other

components of the eBike drive (e.g., the chainwheel,

chainwheel seat, pedals) may be replaced only against

identical components or components specifically ap-

proved for your eBike by the bicycle manufacturer. This

protects the drive unit against overload and damage.

fRemove the battery pack from the eBike before begin-

ning work (e.g. assembly, maintenance, work on the

chain, etc.) on the eBike, transporting it by car or

plane, or storing it. Unintentional activation of the eBike

system poses a risk of injury.

fThe push-assistance function may only be used when

pushing the eBike. Danger of injury when the wheels of

the eBike do not have ground contact while using the push-

assistance function.

fUse only original Bosch battery packs approved for

your eBike by the manufacturer. Using other battery

packs can lead to injuries and pose a fire hazard. When us-

ing other battery packs, Bosch shall not assume any liabil-

ity and warranty.

fDo not make any modifications to your eBike system or

fit any other products which would be suitable for in-

creasing the performance of your eBike system. This

normally reduces the lifetime of the system and risks dam-

age to the drive unit and the bike. There is also a risk of los-

ing the guarantee and warranty claims on the bike you have

purchased. By handling the system improperly you are al-

so endangering your safety and that of other road users,

thus running the risk of high personal liability costs and

possibly even criminal prosecution in the event of acci-

dents attributable to manipulation.

fPlease observe all national regulations on registering

and using eBikes.

fPlease read and observe the safety warnings and in-

structions enclosed in the operating instructions of the

battery pack as well as in the operating instructions of

your eBike.

Product Description and

Specifications

Intended Use

The drive unit is intended exclusively for your eBike and may

not be used for other purposes.

The eBike is intended for use on paved paths. It is not permit-

ted for use in competition.

Product Features

(See page 2–3)

The numbering of the components shown refers to the illus-

trations on the graphic pages at the beginning of the manual.

All illustrations of bike parts except for the drive unit, HMI in-

cluding operating unit, speed sensor and the corresponding

holders are schematic and may differ on your eBike.

1Display-function button “i”

2Illumination button

3HMI

4Holder for HMI

5HMI On/Off button

6“RESET” button

7USB port

8Protective cap of USB port

9Drive unit

10 Operating unit

11 Display-function button “i” on the operating unit

12 Reduce value/scroll down button “–”

13 Increase value/scroll up button “+”

14 Push-assistance button “WALK”

15 Lock latch for HMI

16 Locking screw for HMI

17 Speed sensor

18 Spoke magnet of the speed sensor

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Batavus Milano E-go in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 9.65 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Batavus Milano E-go Manual

Product: