623740
9
Zoom out
Zoom in
Previous page
1/72
Next page
G B
9
O W N E R ' S M A N U A L
Adjustment (Target Setting) is only possible if the
Park symbol P is visible on Display A.
The resistance (Level) can be adjusted using the
+/- buttons during training.
If you have set several functions to count down,
a signal sounds when the first function reaches
zero. Press the + button to switch the sound off. If
you continue training, the function automatically
begins counting upward from zero.
RECOVERY PULSE MEASUREMENT
Measure your recovery pulse after training.
The measurement can only be started if the
pulse measurement is activated and the pulse
value is shown on the display. Start the recovery
pulse measurement by pressing RECOVERY.
The measurement takes 60 seconds. After the
measurement is finished, the display shows the
result F1-F6 (F1 = best result).
Please note that your results are in a relation
to the pulse level in the beginning of the
measurement, and that your results are personal
and cannot directly be compared with any
other persons results. In order to improve the
reliability of recovery pulse measurement, always
try to standardize the measurement situation as
accurately as possible; start measuring at the same
heart rate level as precisely as possible. To switch
back to the main display by pressing RECOVERY.
TRANSPORT AND STORAGE
Please follow these instructions when carrying
and moving the equipment, because lifting it
incorrectly may strain your back or risk other
accidents: The device is easy to move by pushing
along on the integrated transport wheels.
Go behind the equipment. By holding onto the
back part of the frame and the seat handlebar,
incline the equipment forward. We recommend
that you use a protective base when transporting
the equipment.
To prevent the equipment malfunctioning, store in
a dry place with as little temperature variation as
possible and protected from dust.
MAINTENANCE
The equipment requires very little maintenance.
Check, however, from time-to-time that all screws
and nuts are tight.
• After exercising, clean the equipment with a soft,
absorbent cloth. Do not use solvents.
• Never remove the equipment’s protective casing.
MALFUNCTIONS
NOTE! Despite continuous quality control,
defects and malfunctions caused by individual
components may occur in the equipment. In
most cases it’s unnecessary to take the whole
device in for repair, as its usually sufficient to
replace the defective part. Always give the model,
serial number of your equipment and in case of
malfunctions also conditions of use, nature of
malfunction and any error code.
When you encounter unusual behavior from
the device, contact your local Batavus dealer for
service.
If you require spare parts, always give the model,
serial number of your equipment and the spare
part number for the part you need. The spare part
list is at the back of this manual. Use only spare
parts mentioned in the spare part list.
TECHNICAL SPECIFICATIONS
Length ....................................................164 cm
Width .......................................................63 cm
Height ....................................................122 cm
Weight .......................................................50 kg
This product meets the requirements of the EU’s
EMC Directives on electromagnetic compatibility
(89/336/EEC). This product therefore carries the
CE label. This product meets EN precision and
safety standards (EN 957-1 and EN 957-5, class
HB). The equipment is not suitable for exercise
therapy. Due to our continuous policy of product
development, Batavus reserves the right to change
specifications without notice.
NOTE! The instructions must be followed
carefully in the assembly, use and maintenance
of your equipment. The warranty does not
cover damage due to negligence of the assembly,
adjustment and maintenance instructions
described herein.
Changes or modifications not expressly approved
by Batavus will void the user’s authority to operate
the equipment, and any warranty.
We wish you many enjoyable trainings!
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Batavus CR5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Batavus CR5 in the language / languages: English, German, Dutch, French, Italian, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 2,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info