Manual Batavus CR5 (page 8 of 72) (English, German, Dutch, French, Italian, Swedish, Spanish, Finnish)

623740

Zoom out

Zoom in

1/72

O W N E R ' S M A N U A L

Example: If you wish to train in the 75% range,

but the currently displayed range is lower or

higher, you must decrease or increase your

performance appropriately so that your pulse

decreases or increases. You achieve this by changing

the resistance or the pedaling speed. To adjust the

resistance, please use the +/- buttons on the control

panel. If you wish to train using values other

than the preset values, ignore the % numbers and

concentrate only on your actual pulse rate.

Note: Before the control panel can display the

pulse rate or the pulse ranges, it needs at least 10

seconds for calculation purposes.

9. Intensity (Level )

The training intensity is shown on Display B as a

bar diagram (levels 1 -- 8) during training.

10. Programs

The control panel contains the following:

M: A manual program (8 levels)

P: A program with profiles in levels (10 different

profiles)

Switching on and programming

When you switch on the control panel, the

Calendar mode is displayed.

Data entry

If you do not wish to make any changes to, for

example, the time or date, press the ENTER

button until the training time of 00:00 appears on

Display A. At the same time, M for the manual

program appears on Display B.

You can switch to the programming selection of P

= program profiles using the + button.

A. Training wi th the manual program (M)

Press the SELECT button.

Display B then shows the intensity as a flat bar

diagram and a number (1 -- 8). Alternately, the

speed and intensity (1 -- 8) are displayed.

Without entering training data such as Time /

Distance, you may now start training. Select the

intensity levels using the +/-buttons.

For training using the manual program with preset

data, select the range using the ENTER button.

Set the values using the SET button.

The values are always adjusted upward.

Press the ENTER button until the time display is

selected again. Select the time. Then start training.

B. Training using program profiles (P)

After changing from M to P, press the SELECT

button. Using the +/- buttons, select the program

1 -- 10.

Confirm using the SELECT button. The level

profile is shown on Display B.

You can now increase the base intensity (Level)

using the +/- buttons. If desired, use the

ENTER button to switch to training value entry

mode. If you do not wish to enter values, you may

begin training immediately.

Setting the time of day time and calendar

After plugging the unit in, or by pedaling and

pressing the ENTER button, you can set these

values.

The year 2005 will blink.

Set the year using the SET button.

Confirm by pressing the ENTER button.

The number for the month M will blink.

Set the month using the SET button.

Press the ENTER button.

The time of day (hours) D will blink.

Set the time using the SET button.

Press the ENTER button.

The minutes will blink.

Set using the SET button.

Press the ENTER button.

You can now enter the training data.

Additional no tes :

QUICK START

With the transformer connected, start pedaling to

switch the control panel from the Sleep mode into

the input mode.

You can enter values on Display A when one of the

bars is displayed on the left edge.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Batavus CR5 in the language / languages: English, German, Dutch, French, Italian, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 2,75 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Batavus CR5 Manual

Product: