589450

Batavia Racer BT-CS006 Manual

26
Zoom out
Zoom in
Previous page
1/60
Next page
6.3 Note
Attention!
• Beforeundertakinganyworkontheelectric
power tool, unplug it from the mains!
• Donotusetoolinsertswhicharedefectiveor
whichexhibittearsorssures.
•
Donotuseaangeorangenutwithahole
larger or smaller than the hole in the tool insert.
• Onlyusetoolinsertsofthesametypeas
those delivered with the electric power tool.
Seek advice from a specialist trader.
6.4 Inserting and changing tool inserts
(gures 3 and 4)
• Pressthespindlelock(8).
• Loosentheclampingscrew(13)byturningit
clockwise with the Allen key (10).
• Pressthelockonthesafetyguard(7),push
back the movable safety guard and hold it
rmly.
• Ifthetoolinsert(11)isclamped,moveit
downwards.
• Cleantheangeandinstallanewtoolinsert.
Pay attention to the direction of motion (check
the arrows on the housing and on the tool
insert).
• Tightentheclampingscrews,anticlockwise,to
secure the tool insert, ensuring that the tool
insert is concentric.
• Beforeyouoperatetheon/offswitch,make
sure that the tool insert is correctly installed,
that the moving parts are free and the
clampingscrewsarermlytightened.
• Attention! The Allen key (10) must not be
left inserted in the clamping screw.
Note: After installing or changing a tool insert,
allowtheelectricpowertooltorunfortherst
minute without any load, in order to make sure
that the tool insert is correctly seated.
6.5 Setting the cutting depth (Figure 5)
• Loosentheadjustmentscrew(3).
• Adjustthecuttingdepthaccordingtothescale
(a) and tighten the adjustment screw (3).
• Forwoodandplastics,thecuttingdepth
should be selected to be a little deeper than
the material thickness.
26
TM
Attention!
The stated vibration emission was determined using
a standardised measurement technique and allows
comparisons between this tool and others. The stated
vibration emission can also act as a preliminary risk
estimate. The actual vibration emission during tool
use may deviate from the indicated values,
depending on how the tool is used. Based on the
estimated risk under realistic conditions, suitable
preventative measures should be taken to protect the
user (The load run times for all the working cycles
should also be considered such as, for example,
continued turning and idling of the tool).
Limit noise and vibration to a minimum!
• Useonlyproblemfreeelectricpowertools.
• Regularlymaintainandcleantheelectric
power tool.
• Adaptyourworkingmethodstotheelectric
power tool.
• Donotoverloadtheelectricpowertool.
• Havetheelectricpowertoolinspected,if
necessary.
• Switchtheelectricpowertooloffwhenitisnot
in use.
6. USING FOR THE FIRST TIME
6.1 Unpacking
1. Open the packaging and carefully remove the
electric power tool.
2. Remove the packaging material.
3. Remove the packing and transport safety
devices (if any).
4. Check that all the expected contents are
present.
5. Inspect the electric power tool and accessories
for any damage during transport.
6. Retain the packaging, if possible, until the end
of the warranty period. Thereafter, please
dispose of the packaging in an environmentally
friendly way, by utilising a recycling system.
6.2 Connection to the power supply
Make absolutely sure, before connecting, that the
data on the nameplate agrees with the mains
power supply data. Always pull out the power plug
before making adjustments to the electric power
tool.
… 26 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Batavia Racer BT-CS006 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Batavia Racer BT-CS006 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info