589461

Batavia BT-PD001 - 7062052 Manual

17
Zoom out
Zoom in
Previous page
1/36
Next page
17
English
HAMMER DRILLING IN CONCRETE OR
BRICK
Caution: Stone drills can get very
hot.
It may be necessary to drill with smaller bits
and re-drill to nominal size so that later the
plug is rmly seated.
For large bores, for instance in very hard
concrete, use a smaller bit for pilot drilling
and re-drill to nominal size.
Do not apply a lot of pressure on the
machine, let the machine do the work, guid-
ing the machine with light pressure is
sucient.
Hold the machine with the auxiliary handle,
the bit can jam, particularly with deep bores,
and the machine will turn.
MAINTENANCE
Take care that the machine is not
connected to power whenever
maintenance work on the
mechanical parts is taking place.
These machines are designed to function
problem-free for a long period with a mini-
mum of maintenance. Through regular
cleaning and correct treatment, you help
assure a long working life for your machine.
Defects
The machine should be regularly inspected
for the following possible defects, and
repaired if necessary.
• Damage to power cord
• Broken on/o trigger assembly.
• Short circuiting.
• Damaged moving parts.
Trouble shooting
1. When switched on, the motor does
not turn
• Failure in power supply.
• Check the power supply.
• Poor contact in the on/o trigger.
• Repair or replace the trigger assembly.
• Mains voltage too low.
• Extension lead too long, or too light.
• Damaged motor.
• Have your machine repaired by an
expert.
• Carbon brushes worn.
• Replace the carbon brushes.
2. Motor generates excessive noise,
and runs too slowly or not at all
• Motor is overloaded due to excessive
pressure or drilling depth.
• Reduce the pressure or drilling depth,
reduce power.
• Damaged motor.
• Have your machine repaired by an
expert.
• Supply voltage too low.
• Adjust the supply voltage.
• Carbon brushes worn.
• Replace the carbon brushes.
3. Overheating in the transmission case
• Overloading of machine, or blunt drill bit
• Reduce the loading, or hone the drill
bit.
• Reduced voltage.
• Adjust the supply voltage.
4. Heavy sparking from the motor
• Inspect the carbon brushes for wear.
Cleaning
Clean the machine casings regularly with a
soft cloth, preferably after each use. Make
sure that the ventilation openings are free of
dust and dirt. Remove very persistent dirt
using a soft cloth moistened with soapsuds.
Do not use any solvents such as gasoline,
alcohol, ammonia, etc. Chemicals such as
these will damage the synthetic
components.
Faults
Should a fault occur, e.g. after wear of a
part, please contact the service address on
the warranty card. Separate you nd an
exploded view showing the parts that can
be ordered.
7062052_Rotary-Hammer_420W_Ma_#1408-11.indb 17 28-08-14 14:37
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Batavia BT-PD001 - 7062052 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Batavia BT-PD001 - 7062052 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 5,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info