589461
16
Zoom out
Zoom in
Previous page
1/36
Next page
English
16
EXCHANGING AND REMOVING DRILL
BITS
Before exchanging bits, rst remove
the power plug from the wall socket.
Inspect bits regularly during use.
Blunt bits should be re-sharpened or
replaced.
When you want to use an SDS + drill, the
chuck needs to be open completely. Turn
the chuck key anti-clockwise until you hear
a click. Now you need to pull down the
release ring and insert the SDS + drill.
When not using the SDS + drill system you
are able to use conventional drills (wood,
metal, concrete) and bits by using the keyed
chuck.
SETTING DEPTH GAUGE
Fig. A
Loosen the handgrip by turning it
anticlockwise.
Insert the depth gauge ruler through the
hole in the auxiliary handgrip.
Slide the ruler to the desired depth.
Retighten the screw rmly.
FUNCTION SELECTION SWITCH
A
B
The correct position of the selection switch
for each machine function is given in the
diagram.
A: Drilling
B: Hammer Drilling
THE ON/OFF SWITCH
Fig. A
Switch the machine on by pressing the
triggerswitch (2). When you release the
triggerswitch (2) the machine will turn
o.
Switch-lock
You can lock the On/O switch by
pressing the triggerswitch (2) and then
pressing knob (4). Release the switch-
lock by pressing the triggerswitch (2)
shortly.
Speed-control
The rotation-speed can be continuously
adjusted from 0 to 1500 and 0 to 6600
rotations per minute by pressing the
switch (2) deeper or less deep.
ADJUSTING OF THE MAXIMUM
ROTATION SPEED
Switch the machine on by pressing
triggerswitch (2).
Lock the triggerswitch (2) by pressing
knob (4).
Adjust the speed by turning the small
wheel (3) to the desired maximum rota-
tion speed.
SWITCHING THE DIRECTION OF
ROTATION
Direction of rotation counter-clockwise:
shift switch to “”.
Direction of rotation clockwise: shift
switch to “”.
This function is only available when the
machine is set to “drill mode”.
User tips
Always use the machine with the auxiliary
handgrip rmly anchored in place – you will
not only work with more comfort, you will
also work with more precision.
7062052_Rotary-Hammer_420W_Ma_#1408-11.indb 16 28-08-14 14:37
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Batavia BT-PD001 - 7062052 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Batavia BT-PD001 - 7062052 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 5,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info