Manual Batavia BT-NXS001 - 7063578 (page 7 of 40) (English, German, Dutch, French)

758154

Zoom out

Zoom in

1/40

English

g. Check the safe operating condition of

the Nexxsaw, in particular the guide bar

and the saw chain, before each

operation.

h. Always have a safe stand when working

with the saw.

i. 

when switching on.

j. Make sure the guide bar and the saw

chain must be free when switched on

and must not come into contact with

the workpiece to be cut.

k. Keep your hands away from the sawing

area. Do not reach under the workpiece.

Contact with the saw chain may result

in injury.

l. Guide the Nexxsaw onto the workpiece

only when switched on. Otherwise there

is a risk of kick-back if the saw chain

gets caught in the workpiece.

m. When sawing, the base plate must

always face against the workpiece. The

saw chain can become jammed and

lead to loss of control over the machine.

n. When the cut is completed, switch off

the machine and then pull the saw

chain out of the cut only after it has

come to a standstill. This way you can

avoid kick-back.

o. Clamp the material to be processed

well. Do not support the workpiece with

your hand or foot. Do not touch objects

-

ger of kick-back.

p. When sawing converted timber and thin

branches always use a strong support,

such as a sawing trestle. Do not stack

timber pieces.

q. Before cutting logs, secure the logs in

position.

r. When working on sloping ground, make

sure to work facing upwards.

s. Be particularly careful when cutting

splintered wood. Splinters of wood can

be torn along by the saw chain and

increase the risk of injury!

t. Foreign objects such as nails, screws,

metal parts, sand, etc. lead to increased

wear on the guide bar and saw chain.

u. A blunt saw chain can cause overheat-

ing and damage to the motor.

v. Always pull out the battery when check-

ing the chain tension, to re-tighten it, to

mount the saw chain and to eliminate

faults! Also remove the battery if you do

not use the machine temporarily.

3. Safety instructions for chain

saws

a. Keep all parts of the body away from

the saw chain when the saw is operat-

ing. Before you start the saw, make

sure the saw chain is not contacting

anything. A moment of inattention

while operating the saw may cause

entanglement of your clothing or body

with the saw chain.

b. Hold the saw by insulated gripping

surfaces only, because the saw chain

may contact hidden wiring. Saw chains

contacting a “live” wire may make

exposed metal parts of the saw “live”

and could give the operator an electric

shock.

c. Wear eye protection Further protective

equipment for hearing, head, hands,

legs and feet is recommended. Ade-

quate protective equipment will reduce



accidental contact with the saw chain.

d. Always keep proper footing and oper-

ate the saw only when standing on

xed, secure and level surface. Slip-

pery or unstable surfaces may cause a

loss of balance or control of the saw.

e. When cutting a limb that is under ten-

sion, be alert for spring back. When



released, the spring-loaded limb may

strike the operator and/or throw the

saw out of control.

f. Use extreme caution when cutting

brush and saplings. The slender mate-

rial may catch the saw chain and be

whipped toward you or pull you off

balance.

g. Carry the saw by the handle with the

saw switched off and away from your

body. When transporting or storing the

saw, always t the guide bar cover.

7063578-Nexxsaw-Ma-WoF-1910-08.indb 7 15-10-19 17:12

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Batavia BT-NXS001 - 7063578 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4,8 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Batavia BT-NXS001 - 7063578 Manual

Product: