758293
10
Zoom out
Zoom in
Previous page
1/26
Next page
English
8
2 bars and less = The battery charge is low.
The battery must be
charged immediately
10. Charging the built-in Battery
The built-in battery is partially charged at
the factory. Before using the device for the

with the included power adapter.
1. To check the charging status, turn on
the device with the ON/OFF switch (2).
2. If the displayed charging status is low
(less than 3 bars), turn off the power
with the ON/OFF switch (2) and charge
the battery before each use.
3. Connect the power adapter (C) to the
charging socket (12) and to power
mains.
The charge status indicator bars indi-
cate that the built-in battery is charging.
When the built-in battery reaches its
maximum capacity, all four bars appear
on the display.
Charge the built-in battery completely.
Do not charge the built-in battery via the
vehicle electrical system.
Do not use the device while the built-in
battery is charging.
Hints
Only operate the device if the charging
status displays at least three bars. This
corresponds to a battery charging

Avoid deep discharging of the built-in
battery.
The built-in battery of the device must
be charged after each use and at least
once a month, even if the charging
indicator shows three bars.
Do not store the device too cold. At
sub-zero temperatures they may be
delays, as the device needs to warm up

The device is equipped with built-in
fuse, short-circuit, overvoltage and
over-temperature protection.
Improper handling of the battery can
damage the device.
When the built-in battery is charging, all
other functions of the device cannot be
used.
It is not possible to use several func-

compressor, USB connection or 12 V
DC connection) at the same time.
The LED work light can only be used
with one additional function at a time.
Important Notes on Jump Starting

circuit or explosion in case of incorrect
connection of the charging cable to the
vehicle battery.
connect the black battery termi-
nal Minus-
tems or similar parts that come into
contact with fuel.
connect the battery terminals to
each other. Otherwise, there is a risk of
a short circuit.
Do connect the black battery termi-
nal Minus to the negative pole of the
vehicle battery, as the gases in the vehi-
cle battery may explode.
Switch off all consumers in the vehicle
(air conditioner, heated windows, radio,
lights, chargers, etc.) in order to use the
-
ing the engine.
Run the cables of both battery clamps
Plus and Minus so that they cannot be

compartment.
Do disconnect the discharged vehi-
cle battery from the vehicle electrical
system.

well-ventilated environment.
11. Jump Start – Standard Proce-
dure with negative Pole to
Ground
1. Wear suitable work clothing, protective
gloves and safety goggles.
2. 
watches, necklaces) before starting the

10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Batavia BT-JS001 - 7063516 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Batavia BT-JS001 - 7063516 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info