Manual Batavia BT-HG002 7063389 UK (page 9 of 36) (English, German, Dutch, French)

759825

Zoom out

Zoom in

1/36

English

To turn off the appliance:

– Press the on / off switch (1) again. The unit

is now switched off.

To install the nozzle:

The nozzles can easily be pushed over the hot

air nozzle. Never touch the nozzles during or

immediately after use of the device. The

nozzles are very hot.

Rotating handle:

The device has two handle positions (see Fig.

D) Position 1 is suitable for killing weeds and

igniting the BBQ. In position 2, the device can

be used as a hot air gun.

To change the handle position:

• Press the release button (8)

• Turn the handle to the desired position

• Make sure that the release button has

been locked again.

OPTION 1: WEED KILLER

Assembly of the telescopic extension

handle:

Attach the extension handle to the device.

Make sure that the extension handle rmly

clicks into position.The telescopic extension

handle can be adjusted easily to the required

length. Turn knob A, reposition the handle to

the desired length and then turn knob A

securely.If using the device as a weed killer you

must use the extension handle.Hold the weed

killer rmly by holding the end of the extension

handle.

Use:

• Ensure the extension handle is rmly xed

onto the device and that the device is

turned off.

• Turn the device to position 1 (see Fig. D)

• Install the nozzle (11) to destroy weeds.

• Insert the plug into the socket

• Check to ensure the nozzle is not blocked

before turning the device on.

• Set the temperature to setting II or III.

• Allow the device about 45 seconds to

warm up.

• To eliminate weeds, hold the nozzle over

the weeds for about 5 seconds. During

these 5 seconds the cell structure of the

weed is destroyed. As a result, the weed

dies within a few days.

• It is not necessary to completely burn the

weeds, 5 seconds is more than sufcient.

• For an efcient treatment the nozzle

should be held around 0 to 5 cm above

the weeds

• The effects are not visible immediately but

will take a while before they can be seen. It

is more of a long-term effect.

OPTION 2: SPECIFIC WEED KILLER

• Ensure the extension handle is rmly xed

onto the device and that the device is

turned off.

• Turn the device to position 1 (see Fig. D)

• Install the Heat-pin (15) to heat-treat the

weed.

• Insert the plug into the socket.

• Set the temperature switch in position “III”.

• Allow the device about 60 seconds to

warm up.

• Position the heat-pin in the middle of the

weed, and push the pin into the weed, up

to the mark, and retract the heat-pin from

the soil after about 2 seconds.

• The effect of the treatment will not be

immediately obvious as it can take several

days before it is visible, but it will have a

long-term effect.

• Use the heat-pin only on the lawn and

loose soil. Do not use on rocky soil as the

heat-pin could break off.

• On some occasions, a small brown spot of

burned grass can occur, but this will

recover very soon.

OPTION 3: PAINT REMOVAL

The paint removal is always done without the

use of the extension handle. Remove the

extension handle by pressing and releasing

button (7) and pulling the extension handle

from the device.

7063002-Maxxheat-II-Ma-1712-21.indb 9 04-01-18 10:56

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Batavia BT-HG002 7063389 UK in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,83 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Batavia BT-HG002 7063389 UK Manual

Product: