759825
8
Zoom out
Zoom in
Previous page
1/36
Next page
English
8
.
Hold the appliance by insulated gripping
surfaces only, because the metal heating
head may contact hidden wiring or its own
cord.
Immediately switch off the appliance
when:
Plug and/or cable are defective or
damaged;
The switch is defective;
You smell or see smoke caused by
scorched insulation from the hot air gun.
Electrical safety
When using electric machines always observe
the safety regulations applicable in your coun-
try to reduce the risk of re, electric shock and
personal injury. Read the following safety
instructions and also the enclosed safety
instructions.
Always check that the power supply
corresponds to the voltage on the
rating plate.
Class II machine – Double insulation
– You don’t need any earthed plug
Replacing cables or plugs
If the power cord is damaged, it must be
replaced by the manufacturer or its service
agent or a similarly qualied person, in order to
avoid a hazard.
Immediately throw away old cables or plugs
when they have been replaced by new ones. It
is dangerous to insert the plug of a loose cable
in the wall outlet.
Using extension cables
Only use an approved extension cable suitable
for the power input of the machine. The mini-
mum conductor size is 1.5 mm2. When using a
cable reel always unwind the reel completely
Inadequate extension cords can be danger-
ous. If an extension cord is used, it shall be
suitable for outdoor use, and the connection
has to be kept dry and off the ground. It is
recommended that this is accomplished by
means of a cord reel which keeps the socket
at least 60 mm above the ground.
CONTENTS
1 Weed Killer
1 Nozzle for surface weed control
1 Heating pin for underground weed control
2 Nozzles for paint removal
1 Nozzle for BBQ
1 Extension handle (2 parts)
1 Instruction manual
PRODUCT
Fig. A
1. On / off switch
2. Temperature switch
3. Ventilation openings
4. Hot Air nozzle
5. Extension handle
6. Handle
7. Lock button for extension handle
8. Lock button for revolving handle
9. Cap
10. Stand
11. Nozzle for surface weed control
12. Flat nozzle for paint removal
13. Glass protection nozzle for paint removal
14. BBQ / replace nozzle
15. Heating pin for underground weed control
OPERATION
Always use with caution! Do NOT
cover the ventilation openings during
use as it causes a risk of burns!
Do not touch the hot nozzle!
Temperature settings:
With the temperature switch you can select
from three temperature settings. Depending on
the application, you can use the following
settings:
Setting I 50 °C (venting / cooling)
Setting II 400 °C
Setting II 600 °C
The volume of air in each setting 500L /Minute
To turn on the power:
Press the on / off switch (1)
7063002-Maxxheat-II-Ma-1712-21.indb 8 04-01-18 10:56
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Batavia BT-HG002 7063389 UK at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Batavia BT-HG002 7063389 UK in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info