758164
9
Zoom out
Zoom in
Previous page
1/28
Next page
9
English
ment of the carbon brushes may only
be undertaken by a professional. Only
identical replacement parts may be
used! For further information please
contact our customer service
department.
Always keep the ventilation slots (6)
open and clean. After each use remove
dirt and contaminations with a brush or
blow it out with compressed air.
If increased brush re occurs this indi-
cates that the carbon brushes are worn
and should be replaced. Have the
brushes replaced by a professional.
16. Technical data
Rated Voltage: . . . . . . . . . 230 V~ 50 Hz
Rated Power: . . . . . . . . . . . . . . .250 W
No Load Speed: . . . . . 6000 – 11000 min-1
Eccentricity: . . . . . . . . . . . . . . . 1 mm
Sanding Surface : . . . . . . . .187 x 90 mm
Dimensions of Sanding Paper: 230 x 90 mm
Length of Power Cord. . . . . . . . . . . 3 m
Weight: . . . . . . . . . . . . . . . . . 1.83 kg
Sound Pressure Level (LpA). . . . . 66 dB(A)
Uncertainty (KpA). . . . . . . . . . . . 3 dB(A)
Sound Power Level (LWA): . . . . . . 77 dB(A)
Uncertainty (KWA) . . . . . . . . . . . 3 dB(A)
Hand/Arm Vibration . . . . . . . . 6.07 m/s2
Uncertainty (K). . . . . . . . . . . . .1.5 m/s2
Protection Class . . . . . . . . . . . . . . . .II
17. Vibration level
The vibration emission level stated in this
instruction manual has been measured in
accordance with a standardised test given
in EN 60745; it may be used to compare one
tool with another and as a preliminary
assessment of exposure to vibration when
using the tool for the applications
mentioned
using the tool for different applications,
or with different or poorly maintained
accessories, may signicantly increase
the exposure level
the times when the tool is switched off
or when it is running but not actually
doing the job, may signicantly reduce
the exposure level
Protect yourself against the effects of vibra-
tion by maintaining the tool and its accesso-
ries, keeping your hands warm, and organiz-
ing your work patterns.
18. Disposal
Do not dispose of electric power
tools with domestic refuse.
The electric power tool is shipped
in packaging to reduce transport damage.
This packaging is a raw material and as
such can either be reused or can be fed
back into the raw material cycle. The elec-
tric power tool and its accessories are
made from various materials such as met-
als and plastics. Take defective compo-
nents to a special refuse collection point.
Ask about these at your specialist shop or
local council.
19. EC-Declaration of conformity
We, the Batavia GmbH, Weth. Buitenhuis-
straat 2a, NL-7951 SM Staphorst, declare
by our own responsibility that the product
Finishing sander, Item-No 7062853, Model
Nr. BTFS002 is according to the basic
requirements, which are dened in the Euro-
pean Directives Electromagnetic Compati-
bility 2014/30/EU (EMC), 2006/42/EC
(Machinery) and their amendments. For the
evaluation of conformity, the following har-
monized standards were consulted:
EN 60745-1:2009+A11:10
EN 60745-2-4:2009+A11:11
EN 55014-1:2006/+A1:2009/+A2:2011
EN 55014-2:2015
EN 61000-3-2:2014
EN 61000-3-3:2013
Staphorst, 19 February 2017
Meino Seinen, QA Representative
Batavia GmbH, Weth. Buitenhuisstraat 2a,
7951 SM Staphorst, Netherlands
The product and the user manual may be
subject to changes. Technical data may be
changed without prior notice.
7062853-Finishing-Sander-250W-Ma-0-Book-1705-15.indb 9 29-12-17 10:12
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Batavia BT-FS002 - 7062853 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Batavia BT-FS002 - 7062853 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info