Manual Batavia BT-FS002 - 7062853 (page 8 of 28) (English, German, Dutch, French)

758164

Zoom out

Zoom in

1/28

English

the papers. The higher the number is,

the ner the grain.

• It is important to use the right paper for

each job. For rough sanding use grain

sizes up to 80, for soft wood as larch,

pine or spruce use papers from 120 to

150. For dense hardwood as beech or

maple, the grain sizes up to 220 can be

used.

10. Attaching the sanding paper

10.1 Press button (5) inwards in order to lift

up the clamping bracket.

10.2 Fit the sanding paper to the sanding

plate (7). Please observe correct place-

ment of the holes in the sanding paper

according to the holes in the sanding

plate.

10.3 Place the sanding paper on the sanding

plate in such a way that the holes in the

sanding paper correspond with the

holes in the sanding plate. Only then the

dust can be sucked from the sanding

surface into the dust extraction system

through the sanding plate.

10.4 Fold the overhanging ends of the sand-

ing paper around the ends of the sand-

ing plate and under the clamping brack-

ets (5).

11. Dust extraction

Always use the dust collection box when

sanding.

Attach the dustbox to the machine.

Preferably clean the dust collection box and

the exhaust connection in the housing after

each use. By doing this the dust collection

box can be easily inserted and removed.

12. ON/OFF switch

12.1 To turn the machine on, press the ON/

OFF switch (2). To turn the machine off,

release the ON/OFF switch.

12.2 For continuous operation press the ON/

OFF switch and lock it with the locking

button (3).

12.3 To release the lock, press the ON/OFF

button again and the locking button will

be released.

13. Speed adjusting dial

13.1 With the speed adjusting dial (1) you

can adjust the speed according to appli-

cation. Select the appropriate speed

setting and make sure the sander does

not become overloaded and stops

running.

13.2 Turn the speed adjusting dial (1) step-

lessly to the desired setting to increase

or decrease the speed. The adjusting

dial can be adjusted from 1 – 6 (MAX).

13.3 The speed rate can be changed during

operation as well.

Hint: The required speed rate for cutting

resp. sanding a workpiece depends on the

material that you are going to process. For

best performance, make practical tests.

14. Sanding

• Apply only moderate pressure on the

machine. Too much pressure will lead

to jamming of the mechanism and will

spoil the result. Excessive pressure will

overheat the machine.

• Always select abrasive paper with

coarseness suited the condition of the

surface.

• Use ner papers in the consecutive

sanding until the desired smoothness is

reached. If you desire a very smooth

nish you may slightly moisten the

surface before the last sanding. This

will slightly swell the bres and allow a

smoother nish.

15. Cleaning and maintenance

• To avoid injury always pull the power

plug before maintaining or cleaning the

machine.

• Clean the machine with a moist cloth.

• If the machine is very dirty use a mild

detergent or soap on the cloth. Other

cleaning agents may contain chemical

substances which may damage the

plastic parts of the machine.

• Do not allow liquids to enter the

machine and do not immerse the

machine in liquids of any kind.

• Repairs, inspections of the interior of

the machine, adjustments and replace-

7062853-Finishing-Sander-250W-Ma-0-Book-1705-15.indb 8 29-12-17 10:12

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Batavia BT-FS002 - 7062853 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,33 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Batavia BT-FS002 - 7062853 Manual

Product: