Manual Batavia BT-CBCD001 - 7062722 (page 8 of 26) (English, German, Dutch, French)

758250

Zoom out

Zoom in

1/26

English

7.3 Torque Selector

Rotate the Torque Selector (3) to select the

desired setting: the higher the number dis-

played on the torque ring, the higher the

torque produced by the tool.

7.4 Speed setting

The machine has 2 drill speeds, which can

be adjusted by sliding the gear switch (5)

forward or backwards. The number on the

gear switch (5) shows which position is

chosen.

Position 1: For slow drilling, large drilling

diameter or screw driving. The machine has

higher torque at a low speed.

Position 2: For fast drilling or small drilling

diameter. The machine has lower torque at

a high speed.

7.5 Selection:

Mode selector Torque selector Speed

Screwing 1 – 16 * 1

Drilling Masonry /

Concrete

N/A 2

Drilling Wood N/A 1 or 2

Drilling Metal N/A 1 or 2

*• Select a low setting for small screws or

soft work material.

• Select a high setting for large screws,

hard work materials and when remov-

ing screws.

• You should preferably choose a setting

as low as possible when driving screws.

Select a higher setting if the motor slips

before the screw is fully tightened.

WARNING: If the power tool gets exces-

sively hot in use, stop using the tool immedi-

ately and allow to cool before continuing

work. The cooling period can be reduced by

operating the drill at maximum speed with

no load. Always make sure the Motor Vents

(6) are not blocked and do not allow dust to

enter the body of the tool through the Motor

Vents; dust, especially metallic dust, may

damage or destroy the tool.

7.6 Switching the machine on and off

The on/off switch (13) is used for activating

the machine and adjusting rotation speed.

• Pressing the on/off switch (13) will

activate the machine, the further the

switch is being pushed, the faster the

drill will turn.

• Releasing the on/off switch (13) will

stop the machine.

7.7 LED lamp

The LED lamp (14) will be lit automatically

as soon as you press the ON/OFF switch

(13).

8. Accessories

Use only accessories with an allowable

speed matching at least the highest no-load

speed of the tool.

9. Maintenance and Cleaning

WARNING: Always disconnect from the

mains power supply, before carrying out any

maintenance/ cleaning of the charger.

Remove the battery before carrying out any

maintenance/cleaning of the tool.

9.1 Maintenance

There are no inner parts of the tool which

need maintenance.

9.2 Cleaning

• Keep safety devices, ventilation open-

ings and the motor housing as free as

possible from dirt and dust. Rub the

electric power tool with a clean cloth or

blow over it with low pressure com-

pressed air.

• We recommend that you clean your

electric power tool immediately after

each use.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Batavia BT-CBCD001 - 7062722 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,49 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Batavia BT-CBCD001 - 7062722 Manual

Product: