Manual Batavia BT-CBCD001 - 7062722 (page 7 of 26) (English, German, Dutch, French)

758250

Zoom out

Zoom in

1/26

English

being undertaken. A minimum rating of

FFP2 is recommended. If operating the

tool causes discomfort in any way, stop

immediately and review your method of

use.

• Battery chargers are for indoors use

only. Ensure that the power supply and

charger are protected against moisture

at all times.

• Ensure that the lighting is adequate.

• Ensure that the drill bit is securely xed

in the chuck. Insecure drill bits can be

ejected from the machine causing a

hazard.

• Ensure that the drill bit is not in contact

with the workpiece prior to starting up

the tool.

• Before drilling, check that there is suf-

cient clearance for the drill bit under the

workpiece.

• Drill bits get hot during operation, allow

to cool prior to handling them.

• NEVER use your hands to remove saw-

dust, chips or waste close by the bit.

• Examine the chuck regularly for signs of

wear or damage. Have damaged parts

repaired by a qualied service centre.

• ALWAYS wait until the drill has come to

a complete stop before putting it down.

3. Before use

• Avoid damage that can be caused by

screws, nails and other elements in your

workpiece; remove them before you

start working.

• Use suitable detectors to nd hidden

utility lines or call the local utility com-

pany for assistance (contact with elec-

tric lines can lead to re or electrical

shock; damaging a gas line can result in

an explosion; penetrating a water pipe

will cause property damage or an elec-

trical shock).

• Secure the workpiece (a workpiece

clamped with clamping devices or in a

vice is held more securely than by

hand).

4. During use

• Hold power tool by insulated gripping

surfaces (8), when performing an oper-

ation where the cutting accessory or

fastener may contact hidden wiring

(cutting accessory and fasteners con-

tacting a “live” wire may make exposed

metal parts of the power tool “live” and

could give the operator an electric

shock).

• In case of electrical or mechanical mal-

function, immediately switch off the

tool or unplug charger from power

source.

5. Before rst use

Remove the machine and the accessories

from the packaging. Check the machine for

transport damage and do not use the

machine in case of damages. Keep the

packing materials away from children, risk

of suffocation!

6. Intended use

The cordless hammer drill/screwdriver is

designed for tightening and undoing screws,

for drilling in wood, metal and plastic, and

for hammer drilling in stone, in each case

when using the appropriate bits. The equip-

ment is to be used only for its prescribed

purpose.

7. Operation

7.1 Direction control

• The direction of rotation can be set

using the Forward/Reverse Switch (7).

• For anti-clockwise rotation, push the

switch to the right.

• For clockwise rotation, push the switch

to the left.

Note: When the Forward/Reverse Switch is

in the central position, the drill is locked and

cannot be switched on. Use this setting as a

safety feature to prevent the drill from being

switched on accidentally.

7.2 Mode selector

The clutch settings are indicated by the

symbols on the Mode Selector (4).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Batavia BT-CBCD001 - 7062722 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,49 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Batavia BT-CBCD001 - 7062722 Manual

Product: