758138

Batavia Auto Scan FDS-5200 OBD 2 - 7047699 Manual

11
Zoom out
Zoom in
Previous page
1/33
Next page
| 11
GB
• Current-independent unit
• No need for an additional laptop computer to operate
• Small in size and conveniently fits in your palm
• Safely communicates with the on-board computer
• No batteries needed-powered via OBD II cable
DTC EXAMPLE:
P 0 2 0 2
BEFORE FIRST USE
Remove the trouble code reader from the packaging and dispose off packaging material. Plastic bags
etc. may become a deadly toy for children.
Make sure the vehicle is OBD II compliant and has 16-pin DLC (Data Link Connector). The Vehicle Emission
Control Information Label (VECI label) must state that the vehicle is OBD II compliant. To determine where
the DLC is situated, read the vehicle’s owner manual, ask your car repair shop or surf the internet.
WHAT SHOWS IN THE DISPLAY
Operation
SYSTEMS
B = Body
C = Chassis
P = Powertrain
U = Network
CODE TYPE
0 = Generic
1 = Manufacturer
specific
Identifying
specific mal func -
tioning section of
the systems
SUB-SYSTEMS
1 = Fuel and Air Metering
2 = Air imports- and pressure systems
3 = Ignition System or Engine
Misfire
4 = Auxiliary Emission Controls
5 = Vehicle Speed Control and Idle
Controls
6 = Computer Output Circuits
7 = Transmission/Hydraulic
Sensors
8 = Transmission/Hydraulic
Pressure
9 = Automatic Transmission
READING THE DIAGNOSTIC TROUBLE CODES
CAUTION: Do not connect the trouble code reader with ignition on or engine running.
1. Turn ignition off.
2. Connect the unit to the OBD II (DLC) plug in the vehicle.
3. Wait for a minute until the unit is ready for use.
4. Turn ignition on. But do not start the engine. If the display shows a “LINK ERROR!”,
turn ignition off for about 10 seconds. Then turn the ignition back to on and con-
nect the trouble code reader with the vehicle again.
5. Press the Read button in order to read the trouble codes. A sequence of possible
message protocols will be observed on the display.
MOBOSCAN
8400
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Batavia Auto Scan FDS-5200 OBD 2 - 7047699 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Batavia Auto Scan FDS-5200 OBD 2 - 7047699 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 4,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info