738497

Basetech YQ-12 - 561156 Manual

2
Zoom out
Zoom in
Previous page
1/4
Next page
6 Main switch and rst heating power level (400 W)
7 Switch for second heating power level (400 W)
8 Switch for third heating power level (400 W)
9 Switch for oscillation mode
10 Rod-shaped halogen bulb
11 Honeycombed grill
Now insert the mains plug into a mains socket for the public supply grid.1.
You switch the halogen heater on by pressing the main switch „6“ (POWER). The rst heating 2.
level (400 W) is activated.
You switch the halogen heater off by pressing the main switch again. Always pull out the 3.
mains plug from the mains socket after you switch the halogen heater off.
By pressing buttons „7“ and „8“ (400 W), you can increase or decrease the heating power. 4.
(W is watts)
If you press the oscillation switch „9“ (TURN), the heater will start to turn to the left and to 5.
the right.
The halogen heater is equipped with a safety device that switches the heater off automatically 6.
if it falls over.
If the heater does not work when you switch it on, check to see whether it is standing on a rm, 7.
at and stable surface and whether the switch of the safety device is jammed.
Cleaning and maintenance6.
Observe the safety instruction for this and pull the mains plug out of the
socket.
Before cleaning the heater, always pull out the mains plug and allow the heater to cool down. The
housing can be wiped clean with a slightly moist cloth. Do not use abrasives. This could damage
the coating. If the openings are dirty, they can be cleaned with a vacuum cleaner. If you are not
using the heater, keep it stored in a safe and dry place.
Disposal7.
In order to preserve, protect and improve the quality of environment, protect human
health and utilise natural resources prudently and rationally, the user should return
unserviceable product to relevant facilities in accordance with statutory regulations.
The crossed-out wheeled bin indicates the product needs to be disposed separately
and not as municipal waste.
Technical data8.
Operating voltage: 230 V/AC, 50 Hz
Power consumption: max. approx. 1200 watts
1. level: 400 watts, 2. level: 400 watts, 3. level: 400 watts
Declaration of conformity9.
We, Conrad Electronic, Klaus-Conrad-Strasse 2, 92240 Hirschau, Germany, hereby declare that this
product complies with the fundamental requirements and the other relevant provisions of Directive
1999/5/EC. You can nd the conformity declaration for this product under www.conrad.com.
Version 02/10
Halogen Heater
Item no. 56 11 56
Intended Use1.
This halogen heater is suitable for heating in places such as ofces and living areas. By simply
pressing a button, the halogen heater will automatically turn to the left and and to the right for an
optimal heating effect. The halogen heater requires a power supply of 230 V/AC, 50 Hz. You may
therefore only use a 230 V/AC power outlet of the public supply grid. Never try to operate the
halogen heater with another voltage. Use is only permitted in closed, dry rooms, i.e. not outdoors
or in the bathroom. Select a place to set up the halogen heater where it will be protected from
moisture, heavy soiling or overheating.
Unauthorised conversion and/or modication of the device are inadmissible because of safety
and approval reasons (CE). Any usage other than described above is not permitted and can
damage the product and lead to associated risks such as short-circuit, re, electric shock, etc.
Please read the operating instructions thoroughly and keep them for further reference.
Delivery content2.
Halogen heater•
Stand•
2 x screws•
Operating instructions•
Safety instructions3.
We do not assume liability for resulting damages to property or personal injury
if the product has been abused in any way or damaged by improper use or
failure to observe these operating instructions. The warranty will then expire!
The icon with exclamation mark indicates important information in the
operating instructions. Carefully read the whole operating instructions before
operating the device, otherwise there is risk of danger.
Do not cover the device (e.g. with a curtain, blanket, etc.) to avoid overheating
of the device.
Persons / Product
The halogen heater should be kept out of the reach of children. Be particularly careful when •
children are present, especially when they try to push objects through openings in the housing
and into the device. There is risk of a fatal electric shock. When using the heater, keep a good
eye on children and animals present so that they do not burn themselves on the heater or start
a re by knocking the heater over or covering it up.
Do not use the heater near other sources of heat. Position the heater so that ammable objects •
will not be set alight (e.g. curtains). Therefore make sure the heater is in a safe position. The
air inlets and outlets on the heater must be unobstructed. The heater must not be covered up,
e.g. with cloths. There is risk of re. The halogen heater must be at least 50 cm away from
walls or other objects when in operation.
Never touch the housing or the air outlet grill when the heater is in operation or has not yet •
cooled down (risk of burns).
Do not insert any objects into the air outlets or into the interior of the heater (risk of an electric •
shock).
On commercial premises, the relevant accident prevention regulations of the relevant •
professional insurance association for electrical systems and operating materials are to be
observed.
Never pour out liquids above the device. There is risk of a fatal electric shock. Should this •
happen, pull the mains plug out of the socket immediately and contact an expert.
Always unplug the power plug from the mains socket before cleaning the device.•
The product must not be subjected to heavy mechanical stress.•
The product must not be exposed it to extreme temperatures, direct sunlight, intense vibration, •
or dampness.
Before using the device, check that the mains voltage that you want to operate the device with •
matches the voltage specied on its nameplate.
Check both the halogen heater as well as the connection cable for damage from time to time.•
Place the power supply cable such that it does not come into contact with hot parts of the •
heater.
Do not use a double adapter or a similar device to connect the heater to the mains.•
Never switch the halogen heater on immediately after having taken it from a cold to a warm •
environment. The condensation water that develops may destroy the heater. Allow the heater
reach room temperature before turning it on.
Never pull on the connection cable to move the device. Make sure that the connection cable •
does not get caught somewhere unintentionally, leading to a danger of the heater falling over.
Do not wind the connection cable around the heater. Do not kink the connection cable.
Do not use the halogen heater in rooms or under adverse ambient conditions where there are •
or could be combustible gases, vapours or dust.
If you have reason to believe that safe operation is no longer possible, take the halogen heater •
out of operation immediately and secure it against inadvertent operation. It must be assumed
that safe operation will no longer be possible if
There is visible damage to the halogen heater -
The halogen heater no longer functions -
The heater has been stored for a long period of time under unfavourable conditions -
The heater may have been subjected to considerable stress during transportation. -
Miscellaneous
Servicing, adjustment or repair works must only be carried out by a specialist/ specialist •
workshop.
Live components may be exposed if the cover is opened or if components are removed. •
Terminals may also be live. Before maintenance, repair work or replacing components or
assemblies, the halogen heater must be disconnected from the mains power. Maintenance
and repair on the halogen heater must only be carried out by a SPECIALIST who is familiar
with the hazards involved and with the relevant regulations.
If any questions arise that are not answered in this operating instruction, contact our Technical •
Advisory Service or other experts.
Assembly4.
Before assembling the halogen heater, disconnect the mains plug from the
mains power.
The stand must rstly be mounted on the housing of the halogen heater. Use the following 1.
diagram to help you when assembling the heater.
The stand can best be mounted when the heater is lying on its back.2.
Remove the two screws from underneath the heater, pull the connection cable through the 3.
middle of the stand and attach the stand.
Secure the stand on the heater by tightening the two screws.4.
1 Housing
2 Stand
3 Fastening screws (2 pieces)
4 Safety device
5 Power supply cable
Operation5.
Always place the halogen heater on a rm, at and stable surface.
Never operate the halogen heater without the honeycombed grill.
If the halogen heater is not to be used for a long period of time, store it in a
clean and dry place.
The heater must not be used near bathtubs, showers, swimming pools or
washbasins. It must not be possible to operate the heater when you are in
contact with water.
Do not position the device right underneath a mains outlet.
Do not operate the device in conjunction with a timer, a separate remote
control system or other equipment which could turn the heating device on
automatically. This would constitute a re hazard, as would covering the device
or positioning it otherwise incorrectly.
These operating instructions are published by Conrad Electronic SE,
Klaus-Conrad-Straße 1, D-92240 Hirschau/Germany.
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microlming, or the
capture in electronic data processing systems require the prior written approval by the editor. Reprinting, also
in part, is prohibited.
The operating instructions reect the current technical specications at time of print.
We reserve the right to change the technical or physical specications.
© 2010 by Conrad Electronic SE.
*02_02/10_03-SB
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Basetech YQ-12 - 561156 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Basetech YQ-12 - 561156 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info