554331
13
Zoom out
Zoom in
Previous page
1/18
Next page
EN
page 31
USER SECTION
4. CONTROL PANEL AND RELATIVE SYMBOLS
5. OPERATION
Check that the lter (B) is correctly tted in its seat (pict. 9-10).
The lter must be cleaned after every 20 wash cycles and whenever necessary.
DO NOT use the appliance without the lter.
Insert the overow tube (A) in the special seat inside the tub (pict. 9-10)
Close the dishwasher door.
Insert the special rinse aid dispenser tube in the liquid container and check that the
quantity of additive is sufcient for daily use (see chap. 5.2 "Use of rinse aid").
Open the water tap and plug in the main switch.
Turn switch 0-1 1(see chap. 4) to position 1 (pressed).
The operation is signalled by the switch indicator lighting up or by the indicator with the
symbol (a) (see chap. 4).
The machine will automatically ll the tub with water; (indicator (b) - see chap. 4 - when
present will turn on, indicating the tub is full) then the heating phase begins.
Indicator (e) (see chap. 4) comes on when the water temperature is reached.
Insert the rack lled with dishes to wash.
The plates must be correctly placed in the rack (see pict. 11).
On machines with selector 6 (see chap. 4), select the wash cycle required.
Before starting the wash-cycle, in absence of an automatic dosing system, pour the
detergent in the wash-tank.
When the temperature indicator (e) will turn on, press the START 2 button (see chapter
4) for at least a second. The beginning of the cycle is indicated either by the light on the
button itself or on the (c) lamp.
At the end of the washing cycle, a hot rinse cycle will take place.
The indicator light of the START button 2 or the (c) lamp (see chap. 4) will turn off when
the cycle has nished.
At cycle end with the door closed, dishes do not get dried. Take out the baset or keep
the door open to allow the evaporation and the drying of the dishes.
To carry out a cooling glasses cycle, on appliances equipped with this option, press button 3
(see chap. 4) and hold it down for the desired length of time after the indicator light C goes
off. After this cycle, the glasses remain wet.
The appliance is now ready for a new wash.
At the end of the day, clean the machine (see chap. 6 "Maintenance").
Turn off the machine and the water tap.
Turn off the main wall switch.
CONTROLS
Cycle START button
Main switch 0-1
Cooling glasses button
(optional)
Manual empty button
(optional)
Wash type selector
(if provided)
Regeneration START
button (optional)
INDICATORS
Tub full indicator
Power on indicator
Washing cycle
indicator
Temperature
indicator
Regeneration cycle
indicator
a
b
c
d
e
B
A
B
A
pict. 10
pict. 11
pict. 9
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bartscher Deltamat TF 50 L at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bartscher Deltamat TF 50 L in the language / languages: English as an attachment in your email.

The manual is 0,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bartscher Deltamat TF 50 L

Bartscher Deltamat TF 50 L User Manual - German - 19 pages

Bartscher Deltamat TF 50 L User Manual - Dutch - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info