790916

Barbecook STELLA 3221 Manual

11
Zoom out
Zoom in
Previous page
1/400
Next page
www.barbecook.com 11
9 LIGHTING THE BURNERS
0To light the burners with the electrical igniter, you have to
install an AA battery in the igniter. That battery is not
supplied with the appliance. You find the battery case of
the igniter inside the cabinet of your appliance.
9.1 Safety instructions
•Before you light the appliance, execute all checks listed in
“8 Getting the appliance ready for use”.
•Make sure the lid is always open when you light a burner.
•Never bend directly over a burner when lighting it.
9.2 Lighting the main burners
9.2.1 USING THE IGNITER
1Open the lid and set the control knobs of the main burners to
OFF.
2If no other burner is lit yet, open the gas supply and wait ten
seconds. This allows the gas to stabilize.
3Push in the control knob of one burner, set it to HIGH and
hold it for a moment. The build-in igniter will cause sparks,
which will light the burner.
1Always light one main burner to start with. Never light all
main burners at the same time.
4If the burner does not light after three attempts, set its
control knob to OFF, close the gas supply and wait 5
minutes. This allows any accumulated gas to escape.
5Retry lighting the burner. If it still does not light, try lighting it
with a match or refer to "14 Troubleshooting” to determine
the cause of the problem.
9.2.2 USING A MATCH
1Place a match in the match holder.
2Open the lid and set the control knobs of the main burners to
OFF.
3If no other burner is lit yet, open the gas supply and wait ten
seconds. This allows the gas to stabilize.
4Light the match and hold it about 13 mm from the burner.
5Set the control knob of one burner to HIGH.
1Always light one main burner to start with. Never light all
main burners at the same time.
6If the burner does not light within 5 seconds, set its control
knob to OFF, close the gas supply and wait 5 minutes. This
allows any accumulated gas to escape.
7 Retry lighting the burner. If it still does not light, refer to
"14 Troubleshooting” to determine the cause of the problem.
9.3 Lighting the side burner
1The side burner can only carry vessels with a maximum
weight of 9 kg and a maximum diameter of 220 mm.
9.3.1 USING THE IGNITER
1Open the lid and set the control knob of the side burner to
OFF.
2If no other burner is lit yet, open the gas supply and wait ten
seconds. This allows the gas to stabilize.
3Push in the control knob of the side burner, set it to HIGH
and hold it for a moment. The build-in igniter will cause
sparks, which will light the side burner.
4If the burner does not light after three attempts, set its
control knob to OFF, close the gas supply and wait 5
minutes. This allows any accumulated gas to escape.
5Retry lighting the side burner. If it still does not light, try
lighting it with a match or refer to "14 Troubleshooting” to
determine the cause of the problem.
MAN_GAS_QUISSON_BBC_140730_A.book Page 11 Tuesday, February 2, 2016 4:55 PM
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Barbecook STELLA 3221 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Barbecook STELLA 3221 in the language / languages: All languages as an attachment in your email.

The manual is 49.91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info