790916

Barbecook STELLA 3221 Manual

9
Zoom out
Zoom in
Previous page
1/400
Next page
www.barbecook.com 9
6.4 Connecting the hose and cylinder to
the regulator
Depending on the type of pressure regulator you use, you need a
cross-slotted screwdriver and/or an adjustable spanner.
1Connect the hose to the pressure regulator. Do one of the
following:
•If the hose has a clamping ring, slide the hose over the
regulator and tighten the clamping ring with a
cross-slotted screwdriver (A).
•If the hose has a nut, screw the hose on the regulator and
tighten the nut with an adjustable spanner (B).
2Connect the pressure regulator to the gas cylinder. Do one of
the following:
•If the regulator has a nut, screw the regulator clockwise
on the cylinder and tighten the nut with an adjustable
spanner (C).
•If the regulator has a screw thread, screw the regulator
counter-clockwise on the cylinder (D).
6.5 Replacing the cylinder
1Close the gas supply and set all control knobs to OFF.
2Disconnect the empty cylinder and connect the full cylinder.
3Check the cylinder, the hose and all gas connections for
leaks. See “7 Checking for gas leaks”.
7 CHECKING FOR GAS LEAKS
7.1 Why check for gas leaks?
Propane and butane are heavier than air. As a result, they do not
float away when leaking from the appliance. Especially on
windless days, a leak can cause the gas to collect in and around
the appliance. That accumulated gas can then ignite and
explode.
7.2 When check for gas leaks?
•Before the first use or before the first use after a long period
of non-use.
1Also check for gas leaks if your appliance was assembled
by your dealer.
•Each time you replace a gas component.
•At least once a year, preferably at the beginning of the
season.
7.3 Safety instructions
•Put the appliance outdoors, in a well-ventilated area. Make
sure there are no flames or heat sources near the appliance.
•Never use a lighter or match to check for gas leaks.
•Do not smoke and do not light the burners when checking
for gas leaks.
7.4 Which materials do I need?
To check for gas leaks, you need:
•A testing liquid. You can use a ready-made leak spray or a
mixture of water (50%) and dish-washing soap (50%).
•The leak test tool that came with your appliance. You use it
to suck up the testing liquid and apply it to the gas
component or connection that you want to check.
7.5 To check for gas leaks
You check for gas leaks by applying a testing liquid to all gas
components and connections. If the bubbles on a particular
component or connection grow, there is gas leak:
A B
C
D
✔✖
MAN_GAS_QUISSON_BBC_140730_A.book Page 9 Tuesday, February 2, 2016 4:55 PM
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Barbecook STELLA 3221 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Barbecook STELLA 3221 in the language / languages: All languages as an attachment in your email.

The manual is 49.91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info