790883
13
Zoom out
Zoom in
Previous page
1/308
Next page
13
11.4 Maintaining enamel, stainless steel,
chrome and powder coated parts
The appliance is composed of enamelled, stainless steel,
chromed and powder coated parts. Each material has to be
maintained diffe ently:
To prevent formation of rust on stainless steel, avoid
contact with chlorine, salt and iron. We recommend not
using the appliance near the coast, near railways or near
swimming pools.
Damages caused by not following these instructions are
regarded as inadequate maintenance and are not covered
by the warranty.
Below the exploded view of your appliance (second part of the
manual), you find a list with all pa ts of which the appliance
is composed. This list includes a symbol that specifies the
material of each part, so you can use it to check how you have
to maintain a particular part. The parts list uses the following
symbols:
11.5 Storing the appliance
lf you do not use your appliance for a longer period of time, store
it in a dry place. Before you store the appliance:
Disconnect the gas cylinder. Never store your appliance
indoors (not even in a garage or shed) as long as it is
connected to the gas cylinder.
Clean the burners and the grills, rub them with oil and wrap
them in paper.
Cover your appliance with a Barbecook cover. Register your
appliance at www.barbecook.com to find out which cove
you need.
11.6 Storing gas cylinders
These instructions apply to both empty and full gas cylinders.
Always store gas cylinders outdoors, in a well-ventilated
area. Make sure they are not exposed to excessive heat or
direct sunlight.
Never store a gas cylinder in an area that can become very
hot (in a car, on a boat...).
Never store your gas cylinder or spare gas cylinder in the
cabinet of your appliance.
Never store your spare gas cylinder near a gas appliance in
use.
Always store gas cylinders outside the reach of children.
Always store and transport gas cylinders in upright position
Material How to maintain this material
Stainless steel
and chrome
Enamel
Powder coated
Do not use aggressive, abrasive or
metal detergents.
Use soft detergents and let them
act on the steel.
Use a soft sponge or cloth.
Rinse thoroughly after cleaning
and dry well before storing.
Do not use sharp objects and do
not knock against a hard surface.
Avoid contact with cold liquids
while still hot.
You can use metal sponges and
abrasive detergents.
Do not use sharp objects. Use soft
detergents and a soft sponge or
cloth.
Rinse thoroughly after cleaning
and dry well before storing.
Symbol Material
Enamel
Stainless steel
Chrome
Powder coated
2. Clean the burners and venturis with a small brush or a
homemade pipe cleaner (an unfolded paperclip, a pipe
brush ... ).
3. Put the burners back. Make sure to place the venturis over
the openings of the gas valves.
11.7 Ordering spare parts
Parts that are directly exposed to re or intense heat have to be
replaced from time to time. To order a spare part:
1. Look up the reference number of the part you need. You
nd a list of all reference numbers below the exploded views
in the second part of this manual and on www.barbecook.
com.
If you registered your appliance online, you will
automatically be guided to the correct list in your
MyBarbecook account. There you have the possibility to
order your parts online.
2. Order the spare part via www.barbecook.com or at your
point of sale. Parts under warranty can only be ordered at
your point of sale.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Barbecook Spring 2002 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Barbecook Spring 2002 in the language / languages: All languages as an attachment in your email.

The manual is 24.75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info