645683
27
Zoom out
Zoom in
Previous page
1/48
Next page
27
UNILUX-6 270 Left/Right
Installation instructions
3.3.3 Fitting in an existing chimney
Do not use masking tape on the appliance
when installing and plastering.
Tape can damage the fi nish of the appliance.
Remove the existing fi re basket or stoking stones and remove the shut-off fl ap. The
chimney must be intact and must not be damaged during fi tting.
The chimney breast opening must be big enough for a gap of 1 - 3 cm to be left all
round the appliance. Clad the chimney breast opening from the inside with a ceramic
wool fi reblanket or similar (see section 3.3).
Extend the existing chimney so that it ends at the appliance’s smoke outlet. To do
this, use a fl exible, double-walled stainless steel chimney, for example.
Slide the appliance into the chimney breast opening. Seal the smoke outlet where it
joins the chimney so that no soot can accumulate above the appliance under any
circumstances. See 3.3.4.
Level off the appliance so that the cover does not catch on the base.
Fill any gaps around the appliance with a ceramic insulation wool fi reblanket and
position the frame (where supplied).
3.3.4 Fitting in a newly-built chimney
Do not use masking tape on the appliance
when installing and plastering.
Tape can damage the fi nish of the appliance.
If required, a convection set can be added when installing the appliance.
* Appliance without convection fan : The use of a convectionset
is
strongly recommended.
* Appliance with build-in fan : The use of a convectionset is possible,
but not mandatory.
In the case of utilisation of a convection set:
Carefully break out the “break-away openings” at the topside (2x) of the appliance.
Use convection set:
The function of the convection set (option) is to improve the convection through the
appliance, resulting in effi ciency improvement and preventing high temperatures in
the chimney.
The set consists of: 3 m alufl ex
2 exit grids (white)
2 collar adaptors Ø125 mm
4 hose clamps
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Barbas Unilux-6 270 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Barbas Unilux-6 270 in the language / languages: English as an attachment in your email.

The manual is 3.33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Barbas Unilux-6 270

Barbas Unilux-6 270 User Manual - English - 32 pages

Barbas Unilux-6 270 Installation Guide - German - 48 pages

Barbas Unilux-6 270 User Manual - German - 32 pages

Barbas Unilux-6 270 Installation Guide - Dutch - 48 pages

Barbas Unilux-6 270 User Manual - Dutch - 32 pages

Barbas Unilux-6 270 Installation Guide - French - 46 pages

Barbas Unilux-6 270 User Manual - French - 34 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info