645683
28
Zoom out
Zoom in
Previous page
1/48
Next page
28
UNILUX-6 270 Left/Right
Installation instructions
Assembly convection set:
° Secure the 2 collar adaptors to the appliance.
° Now connect the fl exible hoses to the 2 collar adaptors (Ø125 mm) on the top of
the fi re and to the metal fi tting box on the air exit grids that are being used (do not
forget to fi t hose clamps).
° Ensure that the fl exible hose connections are gastight.
° The air exit grids cannot be fi tted until a few days later, once the masonry has
been pointed and allowed to dry. If one or more channels are connected leading
to other rooms, these rooms must be tted with closable grids. These are available
from your dealer, as well as the fl exible hoses and clamps required.
° Within a range of 30 cm either side and 50 cm above the escape opening (exit
grids), there must be no fl ammable materials (e.g. wooden ceiling, fi tted furniture).
Clad the appliance on the top, sides and rear up to the front edge with an approx.
10 cm thick ceramic insulating wool. Leave a few centimetres clearance
between the front of the chimney and the appliance.
Make sure there are a few centimeters of space left between the back of the
appliance (clad with insulating ceramic wool) and the back of the chimney breast, to
ensure a free fl ow of the chimney breast ventilation air.
Level off the appliance.
Make a good seal between the smoke outlet from the appliance to the chimney.
See also 3.3.5.
Ensure that the entire fl ue is gas-tight.
Ventilate the chimney breast, by placing ventilation openings at the top and bottom
of the chimney breast.
The total ventilation openings should be at least 450 cm2 at the bottom of the
chimney breast and also at least 450 cm2 at the top of the chimney breast.
(Total ventilation openings: 900 cm2.)
Attention! : Smaller ventilation openings than prescribed here may
cause damage to the chimney breast.
Always maintain the minimum dimensions of the
ventilation openings!
Close up the front.
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Barbas Unilux-6 270 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Barbas Unilux-6 270 in the language / languages: English as an attachment in your email.

The manual is 3.33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Barbas Unilux-6 270

Barbas Unilux-6 270 User Manual - English - 32 pages

Barbas Unilux-6 270 Installation Guide - German - 48 pages

Barbas Unilux-6 270 User Manual - German - 32 pages

Barbas Unilux-6 270 Installation Guide - Dutch - 48 pages

Barbas Unilux-6 270 User Manual - Dutch - 32 pages

Barbas Unilux-6 270 Installation Guide - French - 46 pages

Barbas Unilux-6 270 User Manual - French - 34 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info