812715
24
Zoom out
Zoom in
Previous page
1/36
Next page
7
7.4.3 Reload with fuel
Caution:
If there is insufficient burning material in the firebed to light a new fuel charge,
excessive smoke emission can occur. Refueling must be done onto a
sufficient quantity of glowing embers and ash to make sure that the new fuel
charge will ignite in a reasonable period. If there are too few embers in the fire
bed, add suitable kindling to prevent excessive smoke.
Note:
The procedure hereunder is a general description. The Barbas Opti-Air app
indicates when a reload with wood logs is necessary.
1. Wait until the last flames have almost disappeared.
2. Open the door.
3. Reload the appliance with wood logs. Refer to
6.2
for the recommended amount of
fuel.
4. Close the door.
5. If desired and applicable, close the safety screen.
6. If desired and applicable, start the convection ventilator.
7. If desired change the combustion level or change to room temperature control with
the Barbas Opti-Air app.
Note:
During the combustion of the first load of fuel, the temperature of the flue
gas must get a pre-set minimum temperature, to enable change of the
combustion level during subsequent fuel loads. If it is not possible to
change the combustion level after combustion of the first load, increase
the amount of fuel with 1 - 2 wood logs on top of the normal fuel load,
during one fuel load.
Note:
If the 230 V power supply of the Opti-Air system is interrupted, a 9V
battery makes sure the air valves go to a safe position. This position
makes sure the appliance can stiil be used, however control of the air
valves is not possible until the 230V power supply is restored
Operation
24
Evolux 70-55
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Barbas Evolux 70-55 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Barbas Evolux 70-55 in the language / languages: English as an attachment in your email.

The manual is 1.27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Barbas Evolux 70-55

Barbas Evolux 70-55 Installation Guide - English - 48 pages

Barbas Evolux 70-55 Installation Guide - German - 52 pages

Barbas Evolux 70-55 User Manual - German - 36 pages

Barbas Evolux 70-55 Installation Guide - Dutch - 52 pages

Barbas Evolux 70-55 User Manual - Dutch - 36 pages

Barbas Evolux 70-55 Installation Guide - French - 52 pages

Barbas Evolux 70-55 User Manual - French - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info