812715
23
Zoom out
Zoom in
Previous page
1/36
Next page
N
Note:
During the first load it is not possible to switch to another combustion level .
To make sure the appliance heats up sufficiently, the Opti-Air system starts
the combustion on the highest combustion level. After the end of the first load
and when the desired flue gas temperature is reached, it is possible to change
the combustion level.
1. When present, open the chimney valve completely.
2. Open the door of the appliance.
3. Put 6 wood logs with a weight of
approximately 0.5 kg and a length
of 30 cm crosswise on the floor of
the combustion chamber.
4. Put 2 wood logs with a weight of
approximately 0.6 kg and a length
of 30 cm on top of the other wood
logs
5. Put some kindling wood with a fire
starter cube above the wood logs.
Make sure the fire starter cube is
loosely surrounded on all sides by
kindling wood.
6. Light the fire starter cubes with a lighter or a match.
7. Close the door of the appliance.
After approximately 20 minutes the wood logs burn. Dependent on the quality of the
chimney the wood logs burn for approximately 1 to 1.5 hours. Do not open the door of the
appliance before the last flames have almost disappeared.
Operation
Evolux 70-55
23
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Barbas Evolux 70-55 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Barbas Evolux 70-55 in the language / languages: English as an attachment in your email.

The manual is 1.27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Barbas Evolux 70-55

Barbas Evolux 70-55 Installation Guide - English - 48 pages

Barbas Evolux 70-55 Installation Guide - German - 52 pages

Barbas Evolux 70-55 User Manual - German - 36 pages

Barbas Evolux 70-55 Installation Guide - Dutch - 52 pages

Barbas Evolux 70-55 User Manual - Dutch - 36 pages

Barbas Evolux 70-55 Installation Guide - French - 52 pages

Barbas Evolux 70-55 User Manual - French - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info