812713
21
Zoom out
Zoom in
Previous page
1/32
Next page
N
Note:
The procedure hereunder is a general description. The Barbas Opti-Air app
indicates when a reload with wood logs is neccesary.
The Opti-Air system works best with closed door during operation.
1. Wait until the last flames have almost disappeared.
2. Open the door.
3. Reload the appliance with 5 wood
logs. Refer to
6.2
for the
recommended amount of fuel.
4. Close the door.
5. If desired and applicable, close the safety screen.
6. If desired and applicable, start the convection ventilator.
7. If desired change the combustion level or change to room temperature control with
the Barbas Opti-Air app.
7.4.4 General firing tips
The Opti-Air control system works best when the appliance is heated up as described
in chapter
7.4.2
. An Insufficient amount of fuel during ignition prevents the Opti-Air
system to work as designed, since the appliance temperature will be too low for the
Opti-Air system to reach its optimal setpoint. Refer to chapter
7.4.2
for advice on the
required fuel quality.
Make sure the door of the appliance is closed when in use. Only open the door for
ignition and to refuel.
Do not remove all the ashes. An ash layer in the combustion chamber forms a heat
insulating layer, that helps the fuel to ignite easy.
After the first load, do not overload the appliance with fuel. Refer to
6.2
for the
recommended amount of fuel. The Opti-Air system prevents the appliance to reach an
excessive high temperature, but a large overload can cause excessive emissions and
loss of efficiency.
7.5 Convection ventilator (option)
It is recommended to always use the convection ventilator when the appliance is in use.
Start the convection ventilator by turning the dimmer knob clockwise in the ON
position.
Set the desired ventilator speed by turning the dimmer knob.
Stop the convection ventilator by turning the dimmer knob counterclockwise into the
OFF position
Operation
Evolux 100-45
21
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Barbas Evolux 100-45 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Barbas Evolux 100-45 in the language / languages: English as an attachment in your email.

The manual is 1.62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Barbas Evolux 100-45

Barbas Evolux 100-45 Installation Guide - English - 48 pages

Barbas Evolux 100-45 Installation Guide - German - 52 pages

Barbas Evolux 100-45 User Manual - German - 36 pages

Barbas Evolux 100-45 Installation Guide - Dutch - 52 pages

Barbas Evolux 100-45 User Manual - Dutch - 32 pages

Barbas Evolux 100-45 Installation Guide - French - 52 pages

Barbas Evolux 100-45 User Manual - French - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info