812713
19
Zoom out
Zoom in
Previous page
1/32
Next page
7
7.3.4 General firing tips
The appliance works best when it has heated up as described in chapter
7.3.1
.
Insufficient heating up leads to a low chimney draught, black deposits on the glass
and incomplete combustion. Good combustion is recognized by bright orange flames,
invisible smoke and no soot deposits on the glass. Use the control lever to get good
combustion. Refer to
6.1
for advice on the required fuel quality.
Make sure the door of the appliance is closed when in use. Only open the door for
ignition and to refuel.
Do not remove all the ashes. An ash layer in the combustion chamber forms a heat
insulating layer, that helps the fuel to ignite easy.
Do not set the control lever in the far left position (all combustion air inlets closed)
when the appliance is used. This will cause severe smoke development, soot
formation and increases the chance of a chimney fire.
After the first load, do not overload the appliance with fuel. Refer to
6.2
for the
recommended amount of fuel. Too much fuel leads to incomplete combustion, soot
formation and a chance of a chimney fire.
7.4 Firing the appliance with the optional Barbas Opti-Air system
If the appliance has the optional Opti-Air system, the appliance automatically controls the
amount of combustion air. With the Barbas Opti-Air app for Android and iOS it is possible
to select from 3 different combustion levels (quiet combustion , nominal combustion,
fierce combustion) or to select room temperature control.
7.4.1 Installation of the Opti-Air app
1. Download the Barbas Opti-Air app from Google Play (Android) or the App Store
(iOS) and install it on your mobile phone or tablet.
2. Start the Barbas Opti-Air on your mobile device.
3. Make sure bluetooth is on and can recognize other devices.
4. Start to make a connection with bluetooth with device "Airmaster"
5. When asked, enter the PIN code 000000.
6. The app is now ready for use.
Important:
It is possible to install the Barbas Opti-Air on multiple mobile
devices. However, the app can only be active on 1 mobile device at the same
time. Before making connection between the appliance and a second mobile
device, disconnect the bluetooth connection between the appliance and the
first mobile device.
7.4.2 First load and ignition
The Opti-Air system works best with closed door during operation.
Warning:
Do not use the appliance when there is fog or haze or no wind.
Note:
During the first load it is not possible to switch to another combustion level .
To make sure the appliance heats up sufficiently, the Opti-Air system starts
the combustion on the highest combustion level. After the end of the first load
and when the desired flue gas temperature is reached, it is possible to change
the combustion level.
Operation
Evolux 100-45
19
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Barbas Evolux 100-45 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Barbas Evolux 100-45 in the language / languages: English as an attachment in your email.

The manual is 1.62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Barbas Evolux 100-45

Barbas Evolux 100-45 Installation Guide - English - 48 pages

Barbas Evolux 100-45 Installation Guide - German - 52 pages

Barbas Evolux 100-45 User Manual - German - 36 pages

Barbas Evolux 100-45 Installation Guide - Dutch - 52 pages

Barbas Evolux 100-45 User Manual - Dutch - 32 pages

Barbas Evolux 100-45 Installation Guide - French - 52 pages

Barbas Evolux 100-45 User Manual - French - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info