812678
20
Zoom out
Zoom in
Previous page
1/48
Next page
7 Installation of the BOX30 50 with steel base
7.1 Install the appliance
1. Put the appliance in the designated position. To put the appliance on a natural stone
platform, refer to section
6.2
2. Obey the safety distances. Refer to section
5.1
.
3. If necessary, put a nonflammable hearth under the appliance. Refer to section
5.1
.
4. Make sure that the flue connection on the appliance is correct in line with the flue
pipe to the ceiling.
5. Make sure the appliance is installed horizontally. Use a spirit lever.
7.2 Connect the optional external air supply
The appliance has the possibility to connect a supply pipe for external combustion air.
During operation the appliance gets combustion air from this air duct.
It is strongly recommended to install a valve in the external combustion air supply
pipe, to avoid debris in the pipe and to avoid water vapor condensation in the
appliance when not in use.
Connection on the rear of the appliance, refer to section
7.2.1
.
Connection on the bottom of the appliance, refer to section
7.2
.
7.2.1 Rear connection
1. Remove the round break out plate
at the rear of the appliance with a
hammer. Another round break out
plate is now visible.
Installation of the BOX30 50 with steel base
20 BOX 30 50
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Barbas BOX 30 50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Barbas BOX 30 50 in the language / languages: English as an attachment in your email.

The manual is 5.02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Barbas BOX 30 50

Barbas BOX 30 50 User Manual - English - 28 pages

Barbas BOX 30 50 Installation Guide - German - 49 pages

Barbas BOX 30 50 User Manual - German - 28 pages

Barbas BOX 30 50 Installation Guide - Dutch - 48 pages

Barbas BOX 30 50 User Manual - Dutch - 28 pages

Barbas BOX 30 50 Installation Guide - French - 49 pages

Barbas BOX 30 50 User Manual - French - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info