812678
18
Zoom out
Zoom in
Previous page
1/48
Next page
6 Installation requirements
6.1 Requirements on the installation of the appliance
Make sure that the location agrees with the safety requirements. Refer to section
4
.
Make sure the floor is made of concrete or a solid pedestal of non-combustible
material.
For the BOX30 50 without wood log storage module, make sure the floor is level. After
placement it is not possible to level the appliance.
Make sure the floor can support the weight of the appliance. Refer to section
10
for
the weight of the appliance.
Make sure that the floor temperatures below and in front of the appliance cannot be
higher than 85 °C, during use of the appliance. Refer to section
4.1
.
The non-combustible floor must have a width that extends at least 150 mm from each
side of the appliance and a minimum depth in front of the appliance according the
requirements in section
5
.
Make sure the room where the appliance is installed has correct ventilation.
Make sure that combustion air can flow into the appliance without obstruction.
If applicable, install a valve in the external combustion air pipe.
6.2 Installation on a natural stone platform
Obey the requirements if the appliance is put on a natural stone platform.
The platform must have minimum
thickness of 3 cm.
The platform must support the weight
of the appliance directly underneath it.
Ask your natural stone dealer
for additional advice regarding the
specific type of stone in combination
with the appliance.
6.3 Requirements on the chimney
Make sure that in case of use of an existing (masonry) chimney, it is in good order and
applicable for the appliance. Ask your dealer or chimney sweeper for advice.
Make sure the flue system obeys the national and local applicable regulations.
Make sure the weight of the chimney is not supported by the appliance.
Only connect the appliance to a chimney that is also connected with other appliances if
it is permitted by local regulations and if the chimney allows to connect multiple
appliances to it. Ask your installer for advice.
The flue system must have a temperature class designation of minimum T400.
The inner diameter of the chimney must be minimum 150 mm over the total length.
Use a steel chimney pipe with a wall thickness of minimum 2 mm between the
appliance and the existing chimney.
Do not use more than 2 bends of 45°.
Installation requirements
18 BOX 30 50
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Barbas BOX 30 50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Barbas BOX 30 50 in the language / languages: English as an attachment in your email.

The manual is 5.02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Barbas BOX 30 50

Barbas BOX 30 50 User Manual - English - 28 pages

Barbas BOX 30 50 Installation Guide - German - 49 pages

Barbas BOX 30 50 User Manual - German - 28 pages

Barbas BOX 30 50 Installation Guide - Dutch - 48 pages

Barbas BOX 30 50 User Manual - Dutch - 28 pages

Barbas BOX 30 50 Installation Guide - French - 49 pages

Barbas BOX 30 50 User Manual - French - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info