541813
11
Zoom out
Zoom in
Previous page
1/15
Next page
9
Remove the Bean Hopper and
Upper Burr
Remove all the beans from the
Bean Hopper. Rotate the hopper
counter clockwise until it stops, lift
the hopper off the grinder. Using
the Baratza Burr Tool included
with your grinder, rotate the metal
burr carrier clockwise until it stops,
then lift straight up and out of the
grinder housing (wiggle the burr
carrier if necessary to loosen it).
The ceramic burr is mounted to
the underside of the burr carrier.
Clean the burr using a stiff brush.
Use the bristle brush to remove
any loose coffee residue on the
xed burr and the lower burr
mounted within the motor housing.
Rotate Baratza burr tool clockwise to
remove the burr carrier.
Replacing the Upper Burr
Wiggle and push down rmly on
the burr carrier to ensure that it
seats properly. Using the Baratza
Burr Tool, rotate the burr carrier
counter clockwise to lock in place.
Note the lock icons and arrows on
top of Baratza Burr Tool indicating
direction to turn.
Replacing the Bean Hopper
To replace the bean hopper, line
up the two small tabs on the base
of the hopper with their respec-
tive slots in the top of the grinder
housing and insert the hopper into
the grinder. Once the hopper is
in place rotate it clockwise until it
clicks to a stop (about ¼ inch or
0.4 cm).
Rotate burr carrier counter clockwise
to lock in place.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baratza Vario-W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baratza Vario-W in the language / languages: English as an attachment in your email.

The manual is 1,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info