541813
8
Zoom out
Zoom in
Previous page
1/15
Next page
6
Normal Grinding Operation
Press the desired button (1, 2,
3). The display LCD will show the
corresponding programmed grind
weight in grams. Press START/
STOP button to begin grinding.
While grinding, the LCD will dis-
play real-time the weight of coffee
in the grounds bin. When the LCD
reaches the programmed weight
(+/- 0.2 gram), the motor will stop
and the display will show the actual
weight in the grounds bin for 3 sec-
onds, then the LCD will reset again
to the programmed weight. The
grinder will only allow for a maxi-
mum of 150 grams to be ground at
one time. At any time during grind-
ing, you can stop the grinding by
pressing the START/STOP button.
The motor will stop and the LCD
will reset to the selected preset
weight.
Programming Dosing Weights
The VARIO-W
TM
is equipped with
three programmable buttons for
weight dosing. The buttons are
simply labeled 1, 2, 3. These pro-
grammable buttons only adjust the
weight of coffee to be ground, they
do not adjust the coarseness of the
grind. Each button comes from the
factory with a preset weight:
1 - 15.0 g, 2 - 30.0 g, 3 - 60.0 g.
You can easily program more or
less grinding weight as follows:
1. Press the up or down arrow just
below the LCD display to adjust
the weight. Press and hold the (up
or down) arrow for 3 seconds to
advance the weight more quickly.
2. Once you have reached the de-
sired weight setting, press the cor-
responding button (1, 2, or 3) and
hold for 3 seconds. The weight
shown in the LCD display will blink
to conrm the setting is stored.
3. Repeat steps 1 and 2 above
for each of the other two button.
The quantity of ground coffee you
need depends on the type of bean,
coarseness of the grind, brewing
method and personal taste. With
use, you will nd the most suitable
settings for your personal taste. If
the grinder is unplugged, the grind-
er will retain the stored weights.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baratza Vario-W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baratza Vario-W in the language / languages: English as an attachment in your email.

The manual is 1,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info