The DVD SYSTEM menu enables you
to choose your preferred system
setup of your DVD player and you
can activate, adjust and deactivate
functions relating to day-to-day use
of your DVD player.
In the SYSTEM menu, you can
choose settings for the following:
– Energy saving mode
– Display settings
– Settings for jumping forward and
backward
– Settings for time and date
– Settings for analogue channels
– Settings for video
– Settings for audio output
System setup
You may want to change the setup of your
DVD player. You can do this in the system
menu. However, if a recording is in progress,
accessing the SETUP menu will stop the
recording and clear the Replay buffer.
While the DVD player is switched on ...
> Press GO then
1 to bring up the system menu.
> Press
repeatedly to highlight SETUP and press
. If a recording is in progress, a warning message
appears to let you know that the recording will
stop and the Replay buffer will be cleared if you
continue.
> Press GO twice to continue or highlight NO
and press GO twice in the menu to abort the
operation. Playback will pause.
> Press repeatedly to see the available setup
options, then press
to access.
> Follow the instructions on the screen.
> Press EXIT to leave the system menu.
If the selection in the menu is greyed out, the
feature is not available or can not be changed in
the current state.
The system setup menu.
What’s on the system setting menu …
ECO MODE … This is an energy saving mode.
When you switch the DVD player to standby
mode, the display panel will turn blank to save
power. The clock will be shown in the display
panel of the DVD player when switching off to
standby mode. Options are ON and OFF.
DISPLAY … Select the brightness of the DVD
player display panel. Options are BRIGHT,
DIMMED and OFF.
JUMP FORWARD … Set the amount of time you
want to skip ahead. The maximum setting is 60
minutes. The factory setting is five minutes.
JUMP BACK … Set the amount of time you want
to skip backwards. The maximum setting is 60
minutes. The factory setting is five minutes.
What’s on the time-date setting menu …
CLOCK PRESET … The time/date can be set
automatically on this DVD player if the stored
television channel transmits a time signal.
Options are AUTO for automatic detection of an
available channel which transmits the time and
date information, a preset number for selecting
a channel to use for transmitting the time and
date information and OFF for selecting before
setting the time and date manually.
TIME … If the time is incorrect, you must manually
set the time here.
DATE … If the date is incorrect, you must
manually set the date here.
Adjust the system setup
