If you have digital satellite channels installed, you can set the television to automatically
update these channels.
The television updates the channels and saves new channels. New channels are saved in
the channels list and are marked with a icon. Channels without a signal are removed
and if satellite providers reorder their channel package, the channel list of the television
will be updated. The television must be in standby to automatically update channels. You
can switch off Automatic Channel Update.
To switch off the automatic update…
1. Press , highlight Settings and press the centre button.
2. Highlight Channels and press .
3. Highlight Satellite Installation and press the centre button.
4. Enter your child lock pin code if necessary.
5. Select Automatic Channel Update.
6. Select Off.
7. Press to go back one step or press to leave the menu.
On some markets, the automatic channel update is done either while watching television
or when the television is in standby.
Manual channel update
You can always start a channel update yourself.
1. Press , highlight Settings and press the centre button.
2. Highlight Channels and press .
3. Highlight Satellite Installation and press the centre button.
4. Enter your child lock pin code if necessary.
5. Select Search for Satellites.
6. Select Update Channels. The television starts updating. The update may take a
while.
7. Select Finish.
Add a satellite
You may be able to add an additional satellite to your current satellite installation. The
installed satellites and their channels remain untouched. Some satellite providers do not
allow adding a satellite.
The additional satellite should be seen as an extra, it is not your main satellite
subscription or not the main satellite of which you use its channel package.
Setup
If you currently have only one or two satellites installed, the current installation settings
may not allow adding an extra satellite. If you need to change the installation settings,
you must perform a complete satellite installation again. You cannot use Add Satellite if
a change of settings is needed.
To add a satellite…
1. Press , highlight Settings and press the centre button.
2. Highlight Channels and press .
3. Highlight Satellite Installation and press the centre button.
4. Enter your child lock pin code if necessary.
5. Select Search for Satellites.
6. Select Add Satellite. The current satellites are shown.
7. Select Search. The television now searches for new satellites.
8. If the television has found one or more satellites, select Install. The television
installs the channels of the found satellites.
9. Select Finish to save the channels and radio stations.
77
