704887

Bang Olufsen BeoVision Horizon 48 Manual

75
Zoom out
Zoom in
Previous page
1/116
Next page
Satellite installation
You can install or update tuned satellite channels which, for example, have been moved
by the broadcaster. Follow on-screen instructions.
Install satellites
This television has two built-in satellite DVB-S/DVB-S2 tuners.
You can install up to four satellites (four LNBs) on the television. Select the exact number
of satellites you wish to install at the start of the installation. This will speed up the
installation.
Unicable
You can use a Unicable system to connect the antenna dish to the television. You can
select Unicable for one or for two satellites at the start of the installation.
Start the installation
Make sure your satellite dish is connected correctly and is perfectly aligned before you
start the installation.
1. Press , highlight Settings and press the centre button.
2. Highlight Channels and press .
3. Highlight Satellite Installation and press the centre button.
4. Enter your child lock pin code if necessary.
5. Select Search for Satellite.
6. Select One Tuner or Two Tuners. The television has 2 built-in satellite tuners.
Make your selection according to how many satellite dish cables you have
available.
7. Select Next.*
8. Select Search. The television will search for the satellites available on the
alignment of your antenna dish. This may take a few minutes. If a satellite is
found, its name and reception strength are shown on-screen.
9. If the television shows the satellite(s) you want, select Install. If the television
does not find the satellite(s) you expect to find, the dish alignment may be
altered or a cable may be disconnected. You can select Search Again.
10. If a satellite offers Channel Packages, the television will show the available
packages for that satellite. Select the package you need.
11. Select Next. Some packages offer a Quick or Full install for their available
channels, select one or the other. The TV will install the satellite channels and
radio stations.
12. To save the satellite setup and installed channels and radio stations, select
Finish.
*Before you start searching for satellites, you can change or check the installation
settings. See Satellite installation settings in this chapter.
Satellite installation settings
The satellite installation settings are preset according to your country. These settings
determine how the television searches and installs satellites and its channels. You can
always change these settings if you start the satellite installation and follow on-screen
instructions. On the screen where you can start searching for satellites, you can also
make settings for satellite installation.
You can select the number of satellites you want to install or select one of the Unicable
systems. When you select Unicable, you can choose the User band numbers and enter
the User band frequencies for each tuner.
Homing Transponder and LNB: On some markets, you can adjust the advanced
settings for homing transponder and each LNB. Only use or change these
settings when a normal installation fails. If you have a non-standard
75
… 75 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bang Olufsen BeoVision Horizon 48 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bang Olufsen BeoVision Horizon 48 in the language / languages: English as an attachment in your email.

The manual is 1,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bang Olufsen BeoVision Horizon 48

Bang Olufsen BeoVision Horizon 48 User Manual - German - 127 pages

Bang Olufsen BeoVision Horizon 48 User Manual - Dutch - 121 pages

Bang Olufsen BeoVision Horizon 48 User Manual - French - 124 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info