22653
14
Zoom out
Zoom in
Previous page
1/20
Next page
Use the PIN code system
The loudspeaker has a built-in PIN code
protection system. You decide whether
or not to activate it.
If you choose to activate the PIN code
system, and if the loudspeaker is
disconnected from the mains for more
than 15–30 minutes, it will only play for
a ve minute period upon reconnection
– and then automatically switch to
standby. In this case, you must key in
your own personally chosen PIN code
with a Beo4 remote control, to unlock
the loudspeaker
PIN code system setup
For your own convenience we suggest that
you choose the same four-digit PIN code for all
your Bang & Olufsen products. However, you
cannot use the code ‘0000’, as this is reserved
for use when deactivating the PIN code system.
To activate the PIN code system
You activate the PIN code system for each
loudspeaker in your setup separately.
While BeoLab 5 is in standby...
> Press , , and STOP in quick succession on the
Beo4 remote control.
The indicator light shines intermittently red
(0.5 sec.) and green (1 sec.).
> Within 10 seconds, press the touch eld on top
of the loudspeaker you wish to activate. The
loudspeaker conrms your selection with a
sound signal.
> Key in a four-digit PIN code of your own choice*.
The loudspeaker conrms each digit with a
sound signal.
> Press the centre button to ac cept your code.
The loudspeaker conrms this with a sound
signal.
> To conrm your chosen code, key in the fourdigit
code again*.
The loudspeaker again conrms each digit with a
sound signal.
> Press the centre button to store your code.
The loudspeaker conrms this with a sound
signal.
If the PIN code is accepted, the indicator light
shines red for a while.
If it is not accepted, the loudspeaker emits a sound
signal, and you will have to start over again with
the four-digit code.
*NOTE! If you make a mistake, press STOP and
then start digit entry over again.
Press the touch eld on the loudspeaker you wish
to activate (while you are pressing the eld, the
indicator light quickly ashes red).
If you wish to skip an ongoing activation, you can
do so by touching the touch eld again (or
pressing BACK on the Beo4 remote control).
We recommend that you disconnect your other
Bang & Olufsen products in the room from the
mains while setting-up the PIN code system. This
prevents them from, for example, switching on,
when you press the buttons on the Beo4 remote
control.
For an overview of the indicator lights and the
sound signals, refer to page 17.
14
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bang Olufsen Beolab5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bang Olufsen Beolab5 in the language / languages: English as an attachment in your email.

The manual is 0,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bang Olufsen Beolab5

Bang Olufsen Beolab5 User Manual - German - 20 pages

Bang Olufsen Beolab5 User Manual - Dutch - 20 pages

Bang Olufsen Beolab5 User Manual - French - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info