22653
11
Zoom out
Zoom in
Previous page
1/20
Next page
Option 0 (factory setup): Used if connected to a
Bang& Olufsen audio (or video) system.
Adapt BeoLab 5 to your system
The loudspeaker is set to Option
number0 from the factory. Therefore,
when you connect the loudspeaker to a
Bang& Olufsen audio or video system, it
is not necessary to change the Option
setting. In this case, the loudspeakers
are controlled via the Bang& Olufsen
system.
However, when the loudspeaker is
connected to a non-Bang & Olufsen
system, you must change the Option
setting. In this case, the Beo4 remote
control signals are received and
processed by the loudspeakers. Two
different Option settings are available
–which to use depends on your setup.
If the LINE output level of your non-Bang&
Olufsen system exceeds 2 V RMS, you must set
the loudspeakers to accommodate a higher
input level (> 2 V RMS 4 V RMS).
Option 1: Used if connected to a non-Bang &
Olufsen system. You may have a Bang & Olufsen
television in the same room, if you wish.
Option 4: Used if connected to a non-Bang&
Olufsen system – and you have an extra Bang&
Olufsen audio system in the same room.
A Beo4 remote control is used to change the
‘Option’ and the LINE input level setting.
To change the Option setting:
> While holding down the • button, press LIST.
> Let go of both buttons.
> Press LIST repeatedly until OPTION? is shown in
the Beo4 display.
> Press the centre button.
> Press LIST repeatedly until L.OPT is shown in the
Beo4 display.
>
Key in the appropriate Option number (0, 1 or 4).
The indicator light switches off briey, conrming
that the new Option number has been stored.
Toensure that all loudspeakers are programmed to
the correct number, repeat the procedure for each
loudspeaker separately.
To change the LINE input level setting
:
> Press LIST repeatedly until SOUND* is shown in
the Beo4 display.
> Press the centre button.
> Key in the appropriate LINE input level number
(1 if LINE input level < 2 V RMS; 2 if LINE input
level > 2 V RMS ≤ 4 V RMS).
The indicator light switches off briey, conrming
that the new LINE input level has been stored.
Toensure that all loudspeakers are set to the same
LINE input level, repeat the procedure for each
loudspeaker separately.
*Must be added to the Beo4 LIST-function. To do so,
refer to the Beo4 online guide.
Option 0
Option 1
Option 4
11
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bang Olufsen Beolab5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bang Olufsen Beolab5 in the language / languages: English as an attachment in your email.

The manual is 0,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bang Olufsen Beolab5

Bang Olufsen Beolab5 User Manual - German - 20 pages

Bang Olufsen Beolab5 User Manual - Dutch - 20 pages

Bang Olufsen Beolab5 User Manual - French - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info