658689
28
Zoom out
Zoom in
Previous page
1/52
Next page
26 |
Software setup | Zeus Glass Helm Installation Manual
Autopilot setup
Verifying the autopilot connection
When an AC12N, AC42N, or SG05 is connected to the Zeus Glass Helm system, the Zeus
Glass Helm should automatically detect the autopilot and an Autopilot menu icon will be
included in the ‘Settings menu.
If no Autopilot’ icon is available in the menu, see “Source selection on page 20 to manually
enable communication.
If after successful communication, the AC12N, AC42N or SG05 is turned o independantly
of the display, the Autopilot’ menu icon will remain available, but limited menu items will be
available.
Commissioning the autopilot
When installation of a new autopilot is completed, the commissioning procedures must
be performed. Failure in setting up the autopilot correctly may prohibit the autopilot from
functioning properly.
If a Zeus Glass Helm is added to an existing, already commissioned autopilot system, it is only
required to do an automatic source selection before the autopilot is ready to be used.
The setup of the autopilot computers (AC12N/42N) can be done in full from compatible
B&G displays that feature a STDBY/AUTO key, or a Triton Display. A Zeus Glass Helm system
with touchscreen control, and/or keyboard and mouse, will require a dedicated physical
keypad for commissioning - the ZC1 and Triton Pilot Controller are ideally suited to this. Once
commissioned, regular operation of the autopilot is possible via solely the touch interface,
however a physical keypad as backup is always recommended.
The following sections describe how you con gure the autopilot from the Zeus Glass Helm.
Dockside setup
Initiating the required dockside setup is done from within the Commissioning dialog.
Completed procedures are labelled with a tick.
When the autopilot computer is delivered from factory AND ANY TIME AFTER AN AUTOPILOT
RESET HAS BEEN PERFORMED, you will have to run a complete setup again.
All steps in all commissioning procedures are clearly described on-screen, and you will be
guided step by step through the process.
1. Ensure that the autopilot is in standby mode before starting (only relevant if previously
commissioned).
2. Select the Commissioning option and follow on screen instructions when the following
prompt is displayed;
3. Select the boat type
The boat type setting is used by the system to select appropriate preset steering parameters.
It will also a ect available autopilot features.
4. Perform the rudder calibration
Used if you have a rudder feedback unit installed. This calibration is used to ensure that the
physical rudder movement corresponds to the rudder angle displayed on the Zeus Glass
Helm unit.
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BandG Zeus2 Glass Helm at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BandG Zeus2 Glass Helm in the language / languages: English as an attachment in your email.

The manual is 6,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of BandG Zeus2 Glass Helm

BandG Zeus2 Glass Helm User Manual - English - 136 pages

BandG Zeus2 Glass Helm User Manual - German - 115 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info