658655
36
Zoom out
Zoom in
Previous page
1/66
Next page
36
|
NMEA 2000 | Zeus Touch installation manual
NMEA 2000 setup
Setup is required on initial start up of the system, or if any part of the NMEA 2000 network has
been changed or replaced.
From ‘Network’ in the main system settings menu you can:
select NMEA2000 data sources - either automatically or manually
con gure instance numbers for NMEA 2000 devices (where multiple sources of same data
exist)
control how device parameters backlighting, units, damping, and alarms are grouped on the
network
select to share waypoints via NMEA 2000
monitor NMEA 2000 network bus state and reliability
control data damping
calibrate water speed derived from a NMEA 2000 source
Auto Select (Source Selection)
The Auto Select option will look for all sources connected to the Zeus Touch system. If more
than one source is available for each data type, the Zeus Touch will automatically select from
an internal priority list.
Make sure all devices are connected and are turned on before selecting the Auto Select
option.
Manual source selection
Manual selection is generally only required where there is more than one source for the same
data, and the automatically selected source is not the one desired.
Group source selection
B&G products such as the Zeus Touch, Zeus, and Triton Display, have the ability to;
use data sources (eg position, wind direction, etc) that all other products on the network use,
or alternatively use a data source independently from other units.
globally change all displays over to a di erent source from any display. (This will only include
products set to a Group mode.)
In order to enable group selection, the display must be set to ‘Default group.
In some cases it may be desired that an Zeus Touch on a network receives the same type of
data, but from di erent sources to that of the rest of the network devices. To do this set the
data Group setting to None, and select a source for the data.
Advanced source selection
This allows the most  exible and precise manual control over which devices provide data to
the Zeus Touch.
Some data sources, such as those for fuel level, or engine RPM, can only be changed via the
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BandG Zeus Touch at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BandG Zeus Touch in the language / languages: English as an attachment in your email.

The manual is 10,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of BandG Zeus Touch

BandG Zeus Touch User Manual - English - 115 pages

BandG Zeus Touch User Manual - German - 115 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info