658717

BandG WTP3 Manual

18
Zoom out
Zoom in
Previous page
1/102
Next page
16
3D_damp
Damping for the 3D compass algorithms. should not be changed under normal use (0.970 is the default value).
sel_comp, sel_heel & sel_trim
Control which input is used for heading, heel and trim respectively. Refer to ‘Multiple Compass, Boat Speed and
GPS Inputs’ for more information.
sel_speed
Controls which input is used for boat speed. Refer to ‘Multiple Compass, Boat Speed and GPS Inputs’ for more
information.
sel_GPS
Controls which set of GPS data is used for position, SOG, COG etc. Refer to ‘Multiple Compass, Boat Speed and
GPS Inputs’ for more information.
log_miles
Allows you to reset the Log variable to any value you wish (though zero is likely to be most useful).
bspd_switch
Controls whether Heel Angle or MWA is used for controlling the port and starboard boatspeed inputs.
datalog
Allows you to manually start or stop the data logging.
Note: Datalog manually starts or stops data logging. Data logging is only available if a valid datalog.d  le is present.
Bounds Checking
To act as an additional level of data validation checking between
the instrument system and the PC, WTP3 allows the user to set
limits on input values.
The incoming data is checked against the previous values. This display
allows you to change the bounds that are used for each incoming
variable; smaller values make errors less likely but increase the possibility
that the numbers will ‘stick’ because of dramatic boat manoeuvres.
The values shown in the example should be used unless you are
experiencing di culties with a particular variable.
Reset Bounds Checking
Clicking this button will cause the next set of incoming data to
overwrite the old, even if it falls outside the error bounds. This
is not normally required but may be necessary under some
circumstances.
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BandG WTP3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BandG WTP3 in the language / languages: English as an attachment in your email.

The manual is 7,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info