658717
12
Zoom out
Zoom in
Previous page
1/102
Next page
10
System Planning
A single CAN network congured to a baud rate of 250k is recommended to make system conguration straight-
forward while allowing for interfacing of NMEA2000 compatible sensors for certain functions. A dual or triple
CAN network conguration is recommended where the system has network cable lengths of over 75 metres, or
there is a requirement for redundant systems.
For example a dual CAN network could allow:
a) Forward and Aft CAN networks, eectively doubling the possible network length
b) Key systems operating on separate networks, for example one GPS unit on each network
Cable lengths
Maximum cable lengths vary depending on the installation. For example a long cable with one interface on the
end will be very dierent to a similar length cable with 16 interfaces , all powering sensors. As such the following
data is a guide only:
Guideline max. cable length per CAN channel
Baud Rate Max Length
125k 150m
250k 75m
500k 35m
1M 5m
Maximum cable length is measured from the two end devices on the network (a+b+c), or the distance between
terminating resistors – whichever is greater.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BandG WTP3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BandG WTP3 in the language / languages: English as an attachment in your email.

The manual is 7,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info