658717
10
Zoom out
Zoom in
Previous page
1/102
Next page
8
Interface Modules
There are 2 types of WTP module, Analogue and Serial. The modules act as the interface between analogue
sensors, serial devices and other inputs and the CPU.
The correct module must be used in conjunction with its corresponding sensors. All modules are powered from
the CAN Bus and can supply power to the sensors connected.
Analogue Module
The analogue module has 6 analogue inputs and 2 pulse inputs. This allows the unit to act as an interface for
masthead units, speed sensors, analogue rate-gyros, potentiometer etc.
Serial Module
The serial module has 2 COM ports, each with input & output. Supported baud rates are 1,200 to 115,200. The
modules support RS232, RS422, RS485 and NMEA0183 devices.
Modules can be located wherever is most convenient for the installer and can connect anywhere on the CAN
networks.
On the top of the Module there is a diagnostic LED enabling the user to see at a glance the status of the module.
This LED will glow green if there is power and will ash to indicate that it is sending/receiving data.
ANALOGUE INTERFACE MODULE
PORT ALLOCATION DESCRIPTION
4 x Analogue Input 12-Bit
3x -5V to +5V
1x 0V to 5V
2 x Analogue Input 10-Bit 2x 0V to 5V
2 x Pulse Inputs eg. Paddlewheel Speed Sensor or Masthead Unit
Note: If the system is to use an analogue speed input then terminals 5 & 6 may be used for this purpose.
SERIAL INTERFACE MODULE
PORT ALLOCATION DESCRIPTION
2 x Bi Directional COM Ports RS232 / NMEA0183 / RS422 / RS485
Each module contains DIP switches to enable the installer to give it a unique network address (Device number).
Instructions on how to do this can be found in the installation section of this manual.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BandG WTP3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BandG WTP3 in the language / languages: English as an attachment in your email.

The manual is 7,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info