658719
48
Zoom out
Zoom in
Previous page
1/55
Next page
H3000 System Installation Guide
48
IS-2530-01
WINTER STORAGE/LAYING UP
Masthead unit
Storage of the masthead unit when the yacht is laid up aoat will increase the life of
the transmitters. It should always be removed from the masthead before the mast is
unstepped. It should be stored in its packing box with the vane and cups removed.
The exposed socket and connector threads at the top of the mast should be smeared
with silicone grease such as MS4 (Midland Silicones Ltd), and then protected with
the plastic cap supplied with it.
The contacts in the masthead unit connector should be inspected for cleanliness and
sprayed with a water inhibitor such as WD40. The outer casing of the connector
should also be smeared with silicone grease.
The masthead unit must never be oiled. The bearings are of the sealed prefabricated
type and any additional oil may cause chemical breakdown of the existing lubricant.
Any scratch marks or corrosion on masthead unit spar should be rubbed clean with
a soft cloth and lightly smeared with silicone grease. This should not be necessary
if care is taken when hoisting or lowering the masthead unit, to protect it from
collision against the rigging.
If the mast is un-stepped, care must be taken to ensure that the cable is not cut
through, but disconnected at the junction box below decks. The bare ends of the
cable should be smeared with silicone grease.
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BandG H3000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BandG H3000 in the language / languages: English as an attachment in your email.

The manual is 6,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of BandG H3000

BandG H3000 User Manual - English - 120 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info