658719
47
Zoom out
Zoom in
Previous page
1/55
Next page
H3000 System Installation Guide
47
IS-2530-01
ROUTINE MAINTENANCE
GENERAL MAINTENANCE
Through-hull housings
Keep the screw threads of through-hull housings well greased with silicone or water
pump grease. Ensure that the outer surfaces of the housing are properly coated with
anti-fouling paint.
Boat speed sensor (paddlewheel type)
Use a stiff brush to remove marine growth that may cause the paddlewheel to freeze,
and then clean the surfaces with a very weak solution of household detergent. If
fouling is very severe, push the paddlewheel axle out by using a small drift, and
then very gently, wet sand the surface with a ne grade wet/dry paper.
Inspect the o-rings on both the sensor and the blanking plug and replace if necessary,
and then lubricate with silicone lubricant or petroleum jelly (Vaseline®).
Boat speed sensor (sonic type)
Aquatic growth can accumulate rapidly on the transducer surface reducing
performance. Clean the surface with a soft cloth and a very weak solution of
household detergent. If fouling is severe, use a stiff brush or a putty knife. Take
care not to cause scratches on the transducer face. Wet sanding using ne grade
wet/dry paper is permissible to remove stubborn deposits.
Surfaces exposed to salt water must be coated with antifouling paint. Use only
water-based antifouling paint. Solvent-based paints must not be used. Solvent-
based paints contain ‘ketones’ which may attack the plastic surfaces and damage
the sensor. Re-apply the antifouling paint every six months or at the start of each
boating season.
Desiccators
Should any display window show signs of moisture having penetrated the seals
e.g. misting of the glass or condensation, the instrument should be removed and
returned to your national distributor for drying.
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BandG H3000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BandG H3000 in the language / languages: English as an attachment in your email.

The manual is 6,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of BandG H3000

BandG H3000 User Manual - English - 120 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info