589861

Ball FTAC-13-10 - FreshTech AutoCanner Manual

114
Zoom out
Zoom in
Previous page
1/120
Next page
114
For more troubleshooting information, visit freshTECHAutoCanner.com.
Observed Issue Cause What To Do
The Display is
showing Error “E9”.
The Lid was not locked. Ensure the Lid was locked properly.
See User Manual.
Cold water was added to
the Inner Pot and filled to the
indicated fill line.
Always add hot tap water to indicated fill
line on the Inner Pot.
Cold food product was filled
into the hot jars instead of
hot food product.
Always follow the recipes provided in the
included Recipe Book. Hot food should
be added to the hot jars, one jar at a time,
immediately after cooking the recipe provided
in this Recipe Book.
Regardless of the cause, you should reprocess
the food following the instructions in the
Reprocessing Jars section of the freshTECH
Recipe Book.
The Display is
showing Error “E12”.
Process was interrupted by
pushing the “Stop/Reset”
button before the end of
the process.
You can immediately Reset by pressing
Stop/Reset button. However if the process
interruption continues beyond 1 minute,
we recommend you stop the process and use
the food within one week with refrigeration.
Reprocess the food immediately following the
instructions on page 21 of this book.
The Display is
showing Error “E10”.
Power interruption. In case the Preserving process of your
freshly prepared foods is terminated due to
power interruption, please remove the food
from the appliance and do not re-process.
Place the jars in the refrigerator to consume
food within one week.
The Display is
showing Error “E11”.
Safety precaution. Please contact our Fresh Preserving
Helpline at 1-800-240-3340.
There is a crackling
sound and smoke
is emitted from
the bottom of the
Inner Pot.
There is residual food that
has spilled onto the heat
plate.
Press and hold the Stop/Reset button for 2
seconds and then unplug the power cord.
Remove pot, wait for components to cool
and wipe off any residue left on the heating
element.
If the problem persists please contact
our Fresh Preserving Helpline at
1-800-240-3340.
At the end of the
process I cannot
get the Appliance
to default back
to the Welcome
display screen.
The Reset sequence was
not followed at the end of
the program.
Once the “Preserving Complete” text is
illuminated and the green Ready light is
flashing, the Appliance is indicating that it
is safe to remove the jars.
Once the jars are removed, press the
Stop/Reset button once, displaying the
“Clean Vent” message.
Proceed to clean the vent with the vent
cleaner and press the Stop/Reset button
again. This will prompt the home screen
to appear.
There may be residue on the
bottom of the Inner Pot.
Carefully remove Inner Pot and check bottom
to ensure clean. If not, wait for Pot to cool
and wipe off any residue.
… 114 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ball FTAC-13-10 - FreshTech AutoCanner at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ball FTAC-13-10 - FreshTech AutoCanner in the language / languages: English as an attachment in your email.

The manual is 7,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info