784764
22
Zoom out
Zoom in
Previous page
1/35
Next page
Ready to enjoy!
Make sure your spa is heated and ready to enjoy with
Heat Settings. Navigate to the Heat Settings screen
from the Main screen by pressing the Settings button
. Press the Heat button , and the Heat Settings
screen appears (A). The Heat Setting screen does not
have Save or Cancel buttons, so changes you make
take effect immediately.
Heat Mode (B)
Ready
Ready Mode (B) keeps the water temperature within
1°F(0.5°C)oftheSettemperature.Forexample,
if the set temperature is 102° F (39.0° C), the water
temperature will be within +/- 1° F (0.5° C ) of 102°
(39.0° C). Press the Heat Mode button (B) to switch
between Read and Rest Mode. The icon appears on
the Main screen when the spa is in Ready Mode.
Rest
RestModefunctionsthesameasReadyMode,except
Rest Mode only heats the water during filter cycles
(view page 13). Press the Heat Mode button (B) to
switch between Read and Rest Mode. The icon
appears on the Main screen when the spa is in
Rest Mode.
Ready-in-Rest
Ready-in-RestModeisthesameasRestMode,except
Ready-in-Rest Mode heats the water, if necessary,
foronehourwhenyouturnOnJets1.The icon
HEAT SETTINGS
appears on the Main screen when the spa is in
Rest-in-Rest Mode.
If the spa is in Ready-in-Rest mode and you go to the
Heat Settings screen (A), that cancels Ready-in-Rest
Mode and puts you back into Rest Mode, even if you
press no buttons while on the Heat Settings screen.
Heater Pump
In order for the spa to heat, a pump needs to
circulate water through the heater. The pump that
performs this function is known as the
“heater pump”.
The heater pump can be either a 2-speed pump
(Pump 1) or a circulation pump. If the heater pump
is a 2-Speed Pump 1, Ready Mode will circulate
water at various intervals, using Pump 1 Low, in order
to maintain a constant water temperature, heat as
needed, and refresh the temperature display. This is
known as “polling.”
Rest Mode will only allow heating during
programmed filter cycles. Since polling does not
occur, the temperature display may not show a
current temperature until the heater pump has been
running for a minute or two. When the heater pump
hascomeonautomatically(forexampleforheating)
you can switch between low speed and high speed
but you cannot turn the heater pump off.
spaTouch 3 User Guide
42344_Rev D 22
A
B
C
D
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Balboa SpaTouch3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Balboa SpaTouch3 in the language / languages: English as an attachment in your email.

The manual is 10.53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info