Manual Balboa SpaTouch3 (page 21 of 35) (English)

784764

Zoom out

Zoom in

1/35

GFCI Test (Continued)

Perform a GFCI Test

Start at the Main screen and follow these steps to

manually test the GFCI.

• Press the Settings button on the Main screen.

• Press the Diagnostics button on the

Settings screen.

• Press the GFCI Test button (C) on the

Diagnostics screen. The GFCI Test screen will appear.

If the GFCI Test status is “Passed” (F), you may not

need to perform this test.

If the GFCI Test status is “Armed” (D), proceed to the

nextstep.

• Press the Test button (E).

Withinapproximately12seconds,oneofthefollowing

two things will happen:

1 - The spa powers down. After the spa powers down,

go to the GFCI and power up the spa. The spa goes

into Priming Mode when it is powered up. When

Priming Mode is complete, navigate to the GFCI Test

screenandconrmthatitsays

“GFCI Status - Passed” (F).

2 - A “GFCI Test Failed” message appears. In this case,

contactaqualiedservicetechnician.Whileyouwait

for the spa technician to arrive, the spa can be run

normally for a time by cycling the power.

Reset Button:

Only use the Reset Button prior to moving the spa to

a new location. Pressing the Reset the button forces a

new Test to be performed at the new location.

A B C

CE Product

CE registered systems do not have an RCD Test

Feature due to the nature of the electrical service. The

end-user must be trained how to properly test and

reset the RCD.

spaTouch™ 3 User Guide

42344_Rev D 21

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Balboa SpaTouch3 in the language / languages: English as an attachment in your email.

The manual is 10.53 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Balboa SpaTouch3 Manual

Product: