784763
24
Zoom out
Zoom in
Previous page
1/28
Next page
Manufactured under one or more of these patents.
U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2, Canadian Patent: 2342614,
Australian patent: 2373248 other patents both foreign and domesc applied for and pending. All material copyright of Balboa Water Group.
42281_A | Compable with SpaTouch 1 & 2 24 03.17
Heater-Related Messages
The water flow is low M016**
There may not be enough water flow through the heater
to carry the heat away from the heating element. Heater
start up will begin again after about 1 min. See “Flow Re-
lated Checks” below.
The water flow has failed*
M017**
There is not enough water flow through the heater to car-
ry the heat away from the heating element and the heater
has been disabled. See “Flow Related Checks” below. After
the problem has been resolved, reset the message*.
The heater may be dry*
M028**
Possible dry heater, or not enough water in the heater
to start it. The spa is shut down for 15 min. Reset this
message* to reset the heater start-up. See “Flow Related
Checks” below.
The heater is dry* M027**
There is not enough water in the heater to start it. The spa
is shut down. After the problem has been resolved, you
must reset the message* to restart heater start up. See
“Flow Related Checks” below.
The heater is too hot*
M030**
One of the water temp sensors has detected 118°f (47.8°C)
in the heater and the spa is shut down. You must reset the
message* when water is below 108°f (42.2°C). See “Flow
Related Checks” below.
Flow-related checks
Check for low water level, suction flow restrictions, closed
valves, trapped air, too many closed jets and pump prime.
On some systems, even when spa is shut down by an error
condition, some equipment may occasionally turn on to
continue monitoring temperature or if freeze protection
is needed.
* Some messages can be reset from the panel. Messages
that can be reset will appear with a Clear Icon at the bot-
tom of the Message Screen. Press the Clear Icon text to
reset the message.
**M0XX is a Message Code.
Codes like this will be seen in the Fault Log
Error
Message Code: 30
The heater is too hot
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Balboa SpaTouch2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Balboa SpaTouch2 in the language / languages: English as an attachment in your email.

The manual is 2.12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info